Amass Xt60-F Female 35A Connector

AMASS XT60-F Female Wire-Mount Connector

The AMASS XT60-F is a female, two-pin power connector designed for wire-to-wire connections. This model is assembled by soldering and will accept 12 AWG wire and a compatible XT60-M male connector.

The XT60 standard is used in RC models, drones, speed controllers, battery packs, and workshop DC systems. The contoured housing forces correct orientation when connecting compatible parts.

Who is this connector for?

• I need the female side of a standard XT60 connection

• I am replacing a damaged pack or power cord connector

• I am building my own adapter, extension cord, or power cord

Who is NOT this connector for?

• I need a connector with a back cover - choose XT60H-F

• I need a complete male and female pair

• The connector is intended to operate in a location exposed to water or direct flooding

• Female part of the XT60

• Maximum current rating 35 A with 12-gauge wire AWG and manufacturer's test conditions

• Test voltage 600 V DC

• Two-pin, profiled housing

• Gold-plated brass contacts

• Housing material: PA with UL94 V-0 flammability rating

• Manufacturer: AMASS

• Model: XT60-F

• Type: female connector

• Series: XT60

• Number of pins: 2

• Rated current: 35 A max at 12 AWG and temperature rise up to 85 K

• Test voltage: 600 V DC

• Insulation resistance: at least 2000 MΩ

• Operating temperature: -20°C to 120°C

• Recommended wire: 12 AWG

• Mounting method: on cable

• Wire connection: soldering

• Housing material: polyamide PA

• Contact material: brass, gold-plated

• Protection class: IP40

• Flammability class: UL94 V-0

• Salt mist resistance: 48 hours

• Declared mechanical durability: 100 cycles

• 1x AMASS XT60-F female connector

Frequently asked questions

Which connector should I connect the XT60-F to?

The XT60-F female connector mates with the standard XT60-M male connector.

Is it necessary to apply insulation after soldering?

Yes. The standard XT60-F model does not have the XT60H backshell, so the soldering points must be properly protected, for example with heat shrink tubing.

Is the connector waterproof?

No. The IP40 rating does not provide protection against flooding.

Avifly expert tip: Apply heat shrink tubing to the wires before soldering. Once the connection is made, it will not be possible to insert them through the connector body. Color: nan Size: nan