Amass Xt30Pw Pcb Connector - Male And Female Set, 90° Angle, 15A, 500V Dc

AMASS XT30PW PCB connector - male and female set

AMASS XT30PW is a set of two angled power connectors designed for THT through-hole mounting on a PCB. The kit includes a male XT30PW-M and a female XT30PW-F connector, allowing you to make a breakaway power connection between two boards or a board and a compatible XT30 cable.

Who is this kit for?

• I'm designing a PCB that requires an angled XT30 power connector

• I need a set of male and female connectors to make a breakaway connection

• I'm building a controller, charger, power module, or model electronics

Who is NOT this kit for?

• I need a connector designed solely for soldering wires

• The circuit requires a continuous current exceeding 15A

• I need a connector with additional signal pins

The most important Features

• 90° angle design - the connector takes up less space above the board surface

• THT PCB mounting - the leads are soldered directly into the PCB holes

• Rated current 15 A and peak current 30 A - parameters suitable for compact power supply systems

• Gold-plated brass contacts - low connection resistance and contact surface protection

• Polarized housing - mechanical protection against reverse connection of compatible components

• Manufacturer: AMASS

• Series: XT30

• Models: XT30PW-M and XT30PW-F

• Number of contacts: 2

• Rated current: 15 A

• Instantaneous current: 30 A

• Rated voltage: 500 V DC

• Contact resistance: 0.80 mΩ

• Orientation: 90° angular

• Mechanical mounting: on PCB

• Electrical mounting: THT

• Contact material: gold-plated brass

• Housing material: polyamide PA

• Flammability class: UL94 V-0

• Mechanical durability: 1000 cycles

• Operating temperature: -20°C to 120°C

• Color: yellow

• 1x AMASS XT30PW-M male connector

• 1x AMASS XT30PW-F female connector

Frequently Asked Questions

Are the XT30PW connectors designed for soldering wires?

No. The XT30PW-M and XT30PW-F versions are equipped with THT pins designed for mounting directly on a PCB.

Is 30 A continuous current?

No. According to the datasheet, the rated current is 15 A, while 30 A is an instantaneous value.

Is a male and female connector included?

Yes. The kit includes one XT30PW-M and one XT30PW-F.

Avifly Expert Tip: Before designing or soldering a board, check the hole spacing, mounting orientation, and polarity on the technical drawing. Rotating the footprint 180 degrees may cause the power supply polarity to be reversed. Color: nan Size: nan