Amass Xt60H-F Female Connector 35A

AMASS XT60H-F Female Connector with Wire Shield

The AMASS XT60H-F is a female, two-pin, in-line power connector. This model is designed for soldering and can accept 12 AWG wire, forming a connection with a compatible XT60H-M male connector.

The rear shield isolates the soldering area from the surrounding area and organizes the wire routing. The connector will be useful when building battery packs, power cables, installations in RC models, and connections between the battery and the speed controller.

Who is this connector for?

• I only need the female side of the XT60H connection

• I am building a power cable or battery pack lead

• I want to cover the soldering points without using a separate connector housing

Who is NOT this connector for?

• I need a complete pair - choose a set of XT60H-F and XT60H-M

• I need a connector mounted on a PCB

• The installation will be exposed to water or direct flooding

• Female version of the XT60H-F for connections with the connector XT60H-M

• Maximum rated current 35 A with 12 AWG wire and manufacturer's conditions

• Test voltage 500 V DC

• Cable assembly by soldering

• Gold-plated copper alloy contacts

• PA housing with UL94 V-0 flammability rating

• Manufacturer: AMASS

• Model: XT60H-F

• Type: female connector

• Number of pins: 2

• Rated current: 35 A max with 12 AWG and temperature rise up to 85 K

• Test voltage: 500 V DC

• Insulation resistance: at least 2000 MΩ

• Operating temperature: -20°C to 120°C

• Recommended wire: 12 AWG

• Mounting method: on cable

• Connection method: soldering

• Housing material: polyamide PA

• Contact material: copper alloy, gold-plated

• Protection degree: IP40

• Flammability class: UL94 V-0

• Salt mist resistance: 48 hours

• Declared mechanical durability: 100 cycles

• 1x AMASS XT60H-F female connector

Frequently Asked Questions

Which connector does the XT60H-F work with?

The XT60H-F is the female part of the system and works with a compatible male XT60H-M connector.

Is a wire included?

No. The connector is designed for self-soldering. For the declared parameters, the manufacturer refers to a 12 AWG wire.

Does the cover replace proper soldering?

No. The cover protects the finished connection, but the wires must be correctly soldered and checked for polarity.

Avifly expert advice: Before connecting the battery, check the polarity of the finished wire with a multimeter. The mechanical standard of the connector does not protect against incorrect soldering of wires. Color: nan Size: nan