Amass Xt60H Power Connectors - Male And Female Pair, 35A, Solder Mount

AMASS XT60H Power Connectors - Male and Female Set

The AMASS XT60H is a pair of two-pin power connectors designed for making wire-to-wire connections in DC installations. The set consists of a male XT60H-M connector and a female XT60H-F connector and is suitable for soldering wires up to 12 AWG.

The XT60H version uses a rear solder sleeve that organizes the wire routing and reduces the possibility of accidental contact with exposed connections. The connectors can be used in RC models, drones, battery packs, speed controllers and power electronics projects.

Who is this set for?

• I am building a power cable terminated with a complete XT60H connector

• I need a male and female connector for wire-to-wire installation

• I use a wire up to 12 AWG

Who is NOT this set for?

• I only need one side of the connector - choose XT60H-F or XT60H-M separately

• The installation requires a waterproof connector - the protection rating of this model is IP40

• I need a connector for mounting directly on a PCB

• The XT60H-F and XT60H-M - both sides of the connection in one set

• Maximum rated current 35 A with 12 AWG wire and manufacturer's test conditions

• Test voltage 500 V DC

• Gold-plated copper alloy contacts - connection intended for power installations

• Polyamide PA housing with flammability class UL94 V-0

• Cable assembly by soldering

• Manufacturer: AMASS

• Series: XT60H

• Models included: XT60H-F and XT60H-M

• Number of pins: 2

• Rated current: 35 A max at 12 AWG and temperature rise up to 85 K

• Test voltage: 500 V DC

• Insulation resistance: at least 2000 MΩ

• Operating temperature: -20°C to 120°C

• Recommended wire: 12 AWG

• Wire connection method: soldering

• Housing material: polyamide PA

• Contact material: copper alloy, gold-plated

• Protection degree: IP40

• Flammability class: UL94 V-0

• Salt mist resistance: 48 hours

• Declared mechanical durability: 100 cycles

• 1x AMASS XT60H-F female connector

• 1x AMASS XT60H-M male connector

Frequently asked questions

How is the XT60H different from the standard XT60?

The XT60H version is equipped with a rear cover for the soldered parts. This improves insulation and cable management behind the connector.

Is the connector supplied with wires?

No. The wires must be selected and soldered separately. The manufacturer specifies 12 AWG wire as the reference size for the declared current parameters.

Is the XT60H connector waterproof?

No. The manufacturer declares an IP40 degree of protection, therefore the connector is not intended for use in water or in a location exposed to direct flooding.

The photos show the actual goods for sale. All rights reserved! Copying, duplication, and use of photos without the author's consent is prohibited.

Avifly expert tip: When soldering, connect both parts of the connector together. The second part stabilizes the contacts and reduces the risk of them shifting due to excessive heating. Color: nan Size: nan