AMASS XT30U 20A Power Connector Pair
The AMASS XT30U is a pair of compact power connectors consisting of a male and female plug, designed for making power connections in DC installations. The connectors support a current of up to 20A with 16AWG wire and a voltage rating of 80V DC.
Low contact resistance of up to 1.2mΩ reduces connection losses. The PA housing is UL94 V-0 flammability rated and the conductive parts are made of a copper alloy with gold-plated contact surfaces.
Who are these connectors for?
• For making compact power connections in RC modeling and electronics
• For installations requiring an XT30U connector with a current rating of up to 20 A
• For soldered wires, including those using 16AWG wire
Who are NOT these connectors for?
• For installations requiring a current greater than the connector rating
• For devices requiring a different connector standard, e.g. XT60 or XT90
• Rated current up to 20 A at the wire 16AWG
• Rated voltage 80 V DC
• Contact resistance up to 1.2 mΩ - limited connection losses
• Copper alloy contacts with gold-plated surface
• PA housing with flammability class UL94 V-0
• Operating temperature range from -20 to 120 C
• Protection degree IP40
• XT30U pair - yellow
• XT30U pair - black
• Manufacturer: AMASS
• Model: XT30U-F/M
• Type: DC power connector
• Number of pins: 2
• Rated current: up to 20 A at 16AWG
• Rated voltage: 80 V DC
• Contact resistance: max. 1.2 mΩ
• Insulation resistance: min. 2000 MΩ
• Operating temperature: -20 to 120 C
• Housing material: PA
• Conductive parts material: copper alloy
• Contact plating: gold
• Flammability class: UL94 V-0
• Protection degree: IP40
• Mechanical life: 100 cycles
• Connection method: soldering
• 1x AMASS XT30U male connector
• 1x AMASS XT30U female connector
Frequently asked questions
Does the kit include both XT30U connectors?
Yes. The kit consists of one male connector and one female connector.
What current does the XT30U support?
The manufacturer states a rated current of up to 20A using 16AWG wire.
Do the connectors require soldering?
Yes. The XT30U-F/M is a connector designed for soldering wires.
Avifly expert tip: Before soldering, slide heat shrink tubing over the wire. After making the connection, thoroughly insulate both solder pads to reduce the risk of accidental short circuits.
Color: nan
Size: nan