Amass Xt90E- Male Panel Connector - Chassis Mount, 45A, 150V Dc

Amass XT90E-M Male Panel Connector 45 A

The Amass XT90E-M Panel Connector is a male, 2-pin DC power connector designed for permanent mounting in an enclosure, panel, battery box or electrical device. A flange with two mounting holes stabilizes the connector, and the wires are connected directly by soldering.

Who is this connector for?

• I'm building a battery box, charger, robot, or device with an XT90 panel outlet.

• I need a fixed, screw-down connector instead of one that hangs freely on the wire.

• My installation is rated up to 45A and 150VDC.

Who is this NOT for?

• I need a standard XT90 connector that mounts only on the wire.

• The installation exceeds 45A or 150VDC.

• I'm looking for the female side of an XT90 connection.

• Rated current 45 A with 10 AWG wire - parameter specified by the manufacturer with a temperature rise not exceeding 85 K

• Rated voltage 150 V DC - can be used in battery installations and DC-powered devices

• Panel mounting on two 3.2 mm holes - the connector remains stable when connecting and disconnecting the wire

• Gold-plated brass contacts - contact resistance does not exceed 1.2 mΩ

• Black polyamide PA housing with a flammability rating of UL94 V-0

• Operating temperature range from -20°C to 120°C

• Manufacturer: Amass

• Model: XT90E-M

• Manufacturer's code: XT90E-M.G.B

• Type: DC power connector

• Connector type: male

• Number of contacts: 2

• Mounting method: panel, 2-hole flange

• Wire connection method: soldering

• Rated current: 45 A at 10 AWG

• Rated voltage: 150 V DC

• Insulation resistance: minimum 2000 MΩ

• Contact resistance: maximum 1.2 mΩ

• Mechanical durability: 100 connection cycles

• Operating temperature: from -20°C to 120°C

• Dimensions: 42.0 x 22.8 x 15.1 mm

• Mounting hole diameter: 3.2 mm

• Housing distance: 32.4 mm

• Housing material: PA

• Contact material: brass

• Contact plating: gold

• Color: black

• Flammability class: UL94 V-0

• Environmental compliance: RoHS 2.0, REACH

• Salt mist resistance: 48 hours according to GB/T 2423.17-2008

• 1x Amass XT90E-M male panel connector

Frequently Asked Questions

Does the XT90 designation indicate a current rating of 90 A?

No. For the XT90E-M model, the current manufacturer's data sheet specifies a current rating of 45 A using 10 AWG wire.

Can the connector be screwed directly to the housing?

Yes. The flange has two 3.2 mm diameter holes, spaced 32.4 mm apart.

Are the wires connected via screw terminals?

No. The wires should be soldered directly to the connector's gold-plated brass pins.

• Do not exceed 45 A current or 150 V DC voltage.

• Do not connect or disconnect the connector under load.

• Do not use the connector as a structural or load-bearing element.

• Before operation, check the correct polarity and the quality of the soldered connections.

Avifly expert advice: After soldering, check the polarity with a multimeter and mechanically relieve the wires inside the housing. The connector should not transfer any forces acting on the wire. Color: nan Size: M