Minwax Wipe-On Poly – Oil-Based Polyurethane Clear Coat, Cloth-Applied, for Interior Wood
Minwax Wipe-On Poly is an oil-based polyurethane clear coat designed for interior wood surfaces. It creates a hard and durable coating that protects the wood from water, food stains, household chemicals, and everyday wear.
The coat is applied with a soft, lint-free cloth. This application method reduces the risk of streaking and leaves no brush marks. The coating gives the wood an elegant look characteristic of a hand-rubbed finish.
Key benefits of Minwax Wipe-On Poly
• protects wood against water, stains, household chemicals and everyday wear,
• creates a hard and durable protective coating,
• is easy to apply with a cloth,
• reduces streaking,
• does not leave brush marks,
• provides a hand-rubbed finish,
• is available in satin and gloss.
Minwax Wipe-On Poly is designed to protect interior wood surfaces such as such as:
• furniture, tables, desks and chests of drawers,
• cabinets and furniture fronts,
• doors, door frames and finishing strips,
• wooden wainscoting and wall panels,
• handrails and balustrades,
• wooden decorative elements,
• veneered surfaces.
This product is not intended for floors or for outdoor use.
• Product type: oil-based polyurethane wipe-on varnish
• Coating color: clear
• Finish: Warm Satin or Warm Gloss
• Application: interior wooden surfaces, except floors
• Coverage: approx. 5.8 m² with 473 ml
• Recoat time: 2–3 hours
• Time before light use: at least 24 hours
• Recommended number of layers: 2–3
• Application method: clean, soft and lint-free cloth
• Available packaging: 473 ml and 946 ml
The given drying times apply to thin layers applied with Good ventilation, at a temperature of approximately 25°C and a relative humidity of 50%. Lower temperatures, higher humidity, limited air circulation or too thick a layer may extend the drying time.
How to use
1. Make sure the surface is dry, clean, and free of dust, grease, wax, polish, and old coatings in poor condition.
2. Smooth the wood with 220-grit sandpaper, then thoroughly remove the dust.
3. If you plan to stain the wood, apply a suitable stain according to the manufacturer's instructions. Allow the stain to dry completely before varnishing.
4. Shake the can thoroughly before use. Repeat this step during application.
5. Apply the varnish to a clean, soft, lint-free cloth and then rub it evenly into the wood.
6. Leave the surface to dry for 2-3 hours.
7. Lightly sand the surface with 220-grit sandpaper and thoroughly remove any dust.
8. Apply a second coat. To increase the durability of the coating, a third layer can be applied in the same way.
9. After applying the last layer, wait at least 24 hours before lightly using the surface.
The protected surface can be cleaned with a damp cloth and water with a mild detergent. Do not use rough sponges or abrasive cleaners, which could damage the coating.
Oil-based varnish can slightly warm up the color of the wood and give it an amber tint. This effect can be particularly visible on light-colored woods and white and pastel stains. Before starting work, it is recommended to test it in an inconspicuous area.
This product contains solvents and is flammable. Use only with adequate ventilation, away from heat, sparks, and open flames.
Immediately after use, place them in a tightly closed metal container filled with water and dispose of them according to local regulations.
Store this product in its original, tightly closed packaging, away from sources of ignition and out of the reach of children.
Товар из Польши
Возврат по недоставке
