Minwax Water-Based Oil-Modified Polyurethane Gloss 946 ml – Water-Based Polyurethane Wood Varnish, High Gloss
The durability of traditional polyurethane, quick drying, and the convenience of a water-based product.
Minwax Water-Based Oil-Modified Polyurethane Gloss is a clear protective varnish for interior wood surfaces. It combines the high durability of oil-modified polyurethane with fast drying times, a milder odor, and easy cleaning of tools with warm water.
The Gloss variant creates an attractive, high-gloss coating that highlights the grain and gives the wood an elegant, slightly warmed appearance. This durable layer protects the surface from scratches, spills, stains, and signs of everyday use.
The product can be used on both unfinished and previously finished wood. Perfect for furniture, doors, cabinets, joinery elements and wooden floors.
• Durable protection against scratches, stains and spilled liquids
• High gloss emphasizing the color and natural grain of the wood
• Water-based, oil-modified formula
• Short drying time - next layer after about 2 hours
• Milder odor than traditional solvent-based varnishes
• Easy cleaning of tools with warm soapy water
• Suitable for raw and previously finished wood
• Can be used on wooden floors
• Colorless coating gives wood a warm, elegant look
• Intended for For indoor use.
Gloss Finish – Elegant High Gloss
The Gloss version creates a smooth, highly glossy coating that effectively reflects light and brings out the depth of the wooden surface. It perfectly complements classic furniture, decorative joinery elements, doors, countertops, and other projects where a representative appearance is important.
Due to its oil-based modification, the varnish can subtly warm up the natural color of the wood. If you want a completely crystal-clear finish on light wood species or white surfaces, test in an inconspicuous area before application.
Minwax Water-Based Oil-Modified Polyurethane can be used on:
• wooden furniture,
• tables, desks, shelves and bookcases,
• doors and door frames,
• kitchen cabinets and fronts,
• mouldings, balustrades and joinery,
• wooden floors,
• untreated wood surfaces,
• wood previously stained or finished with a suitable, well-bonded coating.
This product is intended for interior use only. Do not use on exterior surfaces.
1. The surface must be completely dry, clean, and free of grease, wax, polish, dirt, and other contaminants.
2. Remove old coatings that are damaged, peeling, or have poor adhesion.
3. Sand the wood until smooth and even.
4. Do not use steel wool. Some of this dust can remain on the wood and cause discoloration or rust.
5. Carefully remove sanding dust with a damp, lint-free cloth.
6. If necessary, you can apply a stain, such as Minwax Wood Finish or Minwax Gel Stain, to the bare wood first.
7. After applying the stain, observe the drying time indicated on the label. The manufacturer recommends waiting at least 8 hours before applying Oil-Modified Polyurethane varnish.
Always test on a small, inconspicuous area of the surface to check the color, gloss, and compatibility with the previous finish.
How to use
1. Before application and regularly during use, stir the product thoroughly, removing any sediment from the bottom of the container.
2. Do not shake the can - this may cause air bubbles to form, making it difficult to achieve a smooth coating.
3. Apply a thin, even layer using a high-quality synthetic bristle brush or a sponge brush.
4. Leave the surface to dry for approximately 2 hours.
5. Lightly sand the entire surface with fine 220-grit sandpaper. This will improve the smoothness and adhesion of the next layer.
6. Carefully remove all dust.
7. Apply a second layer, then repeat the light sanding and dust removal process.
8. Apply a third, final layer.
9. After the last application, wait at least 24 hours before lightly using the surface.
For proper durability and even gloss, 3 thin layers are recommended. Do not apply one thick layer instead of several thin ones.
Application on wooden floors
On floors, use a lambswool applicator, a synthetic applicator, or a synthetic bristle brush. Keep the edge wet while working to minimize seam marks.
Three coats are required for maximum durability.
• Light traffic is possible after approximately 24 hours.
• Avoid heavy traffic and furniture rearrangement for 72 hours.
• Furniture should be moved, not pushed, across the surface.
• Do not place carpets or wash the floor for 7 days.
• Product Type: Clear Oil-Modified Polyurethane Varnish
• Formulation: Water-Based
• Use: For interior
• Finish: Gloss – high gloss
• Coating color: colorless, with a warm character
• Capacity: 946 ml
• Approximate packaging efficiency: approximately 11.6 m² per layer
• Time to apply the next layer: approximately 2 hours
• Time before light use: approximately 24 hours
• Recommended number of layers: 3
• Sanding between layers: 220 grit sandpaper
• Tools: synthetic brush, sponge brush; on floors also an applicator made of lambswool or synthetic material.
• Cleaning of tools: warm soapy water.
• Suitable for floors: yes.
• Suitable for outdoor use: no.
Important information and precautions.
• Use the product only with adequate ventilation.
• Ensure fresh air during application and drying.
• Avoid contact with eyes and skin.
• Wash hands thoroughly after use.
• Do not swallow the product.
• Keep tightly closed and out of reach of children.
• Do not transfer the contents to other, unmarked packaging.
• When removing old coatings, it may Lead dust may be generated, especially on very old surfaces. Use appropriate personal protective equipment and safe dust control methods.
• Read the label and product safety data sheet before use.
Minwax Water-Based Oil-Modified Polyurethane Gloss 946 ml is an excellent choice for those looking for a striking, durable finish without long waiting times between coats. The high gloss shine enhances the natural beauty of the wood, and the durable coating helps maintain its elegant appearance despite everyday use.
Товар из Польши
Возврат по недоставке
