Minwax Super Fast-Drying Polyurethane for Floors 3.78L - Fast-Drying Polyurethane Finish for Hardwood Floors
Minwax Super Fast-Drying Polyurethane for Floors is a clear, oil-based polyurethane finish specifically formulated to protect hardwood floors. It creates a durable coating that protects the surface from everyday wear and tear, and its optimized drying time allows for recoating in just 3-4 hours.
The advanced, low-settling formula requires less mixing and helps achieve an even gloss level on large surfaces. If the recoat is applied in less than 12 hours, sanding between coats is not required.
The product may appear dark in the can, but dries to a clear finish. Because it is an oil-based formula, it may slightly deepen the natural color of the wood. A test run is recommended before starting work.
• Specially formulated for hardwood floors.
• Creates a durable, protective polyurethane coating.
• The next coat can be applied after approximately 3-4 hours.
• No sanding required between coats if the interval does not exceed 12 hours.
• Allows for multiple coats to be applied in one day.
• The advanced formula reduces settling of ingredients in the container.
• Requires less mixing during the project.
• Helps achieve an even gloss level over a large surface.
• Can be applied with a lambswool applicator, a synthetic pad, or a natural bristle brush. bristles.
• The floor can be carefully walked on after approximately 12-18 hours.
• Available in three gloss levels.
Available finish variants
The product is colorless and does not come in shades that stain the wood. Available finish variants refer to the gloss level:
• Gloss: the shiniest finish, strongly emphasizing the color and grain of the wood.
• Semi-Gloss: a balanced gloss level, combining a decorative effect with a more subdued appearance.
• Satin: a delicate, subtle sheen providing a more natural look to the floor.
The manufacturer does not list a completely matte variant. Gloss, Semi-Gloss, and Satin are not colors or stains – all variants dry to a clear coat and differ only in the intensity of light reflection.
Minwax Super Fast-Drying Polyurethane for Floors is intended for:
• new bare wood floors,
• floors previously stained with a suitable stain,
• renovating existing floors using the "screen and recoat" method,
• parquet and other hardwood floors,
• surfaces prepared with Minwax Professional Formula Sanding Sealer.
This product is specifically formulated for wood floors. Do not automatically apply it to laminate, vinyl plank, tile, or other non-wood surfaces.
Number of Coats
• Bare wood: 3 coats.
• Stained wood: 2 coats.
• Screen and recoat: 2 coats.
• Minwax Sanding Sealer: 2 coats.
When applying stain, ensure it is completely dry and suitable for recoating with an oil-based polyurethane varnish.
1. Sand the floor thoroughly according to the requirements of its condition and previous Finish.
2. Remove all sanding dust and other dirt.
3. The surface must be clean, dry, and free of grease, wax, and other substances that reduce adhesion.
4. If stain was used, allow it to dry completely according to the manufacturer's instructions.
6. Ensure adequate ventilation during application and drying.
How to use
1. Before use, stir the product thoroughly by moving the material from the bottom to the top of the container.
3. If the entire project is completed in one day, re-stirring during work should not be necessary.
4. Apply a thin, even coat using:
• a lambswool applicator,
• a synthetic pad applicator,
• a high-quality natural bristle brush.
5. Keep a "wet edge" during application to minimize visible seams. stripes.
6. Let the coat dry for 3-4 hours, but apply the next coat within 12 hours.
7. If the next coat is applied within this time frame, sanding between coats is not required.
8. Apply the second coat in the same manner.
9. If the wood is bare, apply a third coat as well.
Do not apply too thick a coat. Excessive amounts of varnish can slow down drying, cause unevenness and extend the waiting time before the next step.
Sanding between coats
If more than 12 hours have passed since the application of the previous coat, the surface should be lightly sanded with 220 grit sandpaper and then the dust should be thoroughly removed.
The coat must dry for at least 3-4 hours before sanding. Do not sand the finish while it is still tacky.
Sanding is not necessary at the recommended intervals, but for maximum smoothness, you can lightly sand the surface before applying the final coat with 220-grit sandpaper or equivalent.
Using with Minwax Sanding Sealer
1. Apply primer according to the label instructions.
2. Allow it to dry for at least 2 hours before sanding.
3. Sand and dust thoroughly.
4. Apply 2 coats of Minwax Super Fast-Drying Polyurethane for Floors.
For differences in product instructions, always refer to the current product label. Labels.
Drying time and use of the floor
• Recoating time: 3–4 hours.
• Maximum interval without sanding: less than 12 hours.
• Light foot traffic: after approximately 12–18 hours.
• Intensive use: avoid for 7 days.
• Laying carpets: not earlier than after 7 days.
• Washing the floor: not earlier than after 7 days.
• Placing furniture: Be careful and do not move furniture across the surface.
Drying times may be longer at low temperatures, high humidity, or insufficient ventilation. or applying too thick a layer.
• Product type: fast-drying polyurethane floor varnish
• Base: oil, solvent-based
• Color: colorless after drying
• Available gloss levels: Gloss, Semi-Gloss, Satin
• Application: hardwood floors
• Time to recoat: 3–4 hours
• Sanding between coats: not required with an interval of less than 12 hours
• Grade for optional or required sanding: 220
• Number of coats on bare wood: 3
• Number of coats on stain or screen and recoat: 2
• Number of coats on Minwax Sanding Sealer: 2
• Light foot traffic: after approximately 12-18 hours
• Full protection period against intensive use, washing and carpeting: 7 days
• Application: lambswool applicator, synthetic pad or natural bristle brush
• Available capacities: 3.78 l (1 US gal) and 9.46 l (2.5 US gal)
• Manufacturer: Minwax Company
• Brand country of origin: USA
The current product page does not provide efficiency figures or cleaning methods for the tools. In these matters, please follow the information on the packaging of the purchased variant.
Warning regarding old coatings
When removing old coatings, wear appropriate protective equipment, including properly fitted respiratory protection, limit dust spread, and thoroughly clean the work area.
Important safety information
Use only outdoors or in a well-ventilated area. During application and drying, open windows and doors or otherwise ensure a constant supply of fresh air. Do not inhale vapors.
Wear gloves, protective clothing, and eye/face protection. Avoid contact with eyes and skin. This product may cause an allergic skin reaction, drowsiness, or dizziness. It is suspected of causing cancer and may damage fertility or the unborn child.
Before use, read all warnings on the label and safety data sheet.
Swallowing the product and entering the airways may be fatal. If swallowed, do not induce vomiting and contact a doctor or poison control center immediately.
In case of contact with skin, wash thoroughly with soap and water. If breathing becomes difficult, remove to fresh air and consult a physician.
Prolonged or repeated exposure to solvent vapors can cause permanent damage to the brain and nervous system. Deliberately concentrating and inhaling vapors may be harmful or fatal. Do not swallow. Keep out of the reach of children.
Cloths, steel wool, sanding dust, and other waste soaked in this product may spontaneously ignite if left or disposed of improperly.
Immediately after use, place all soaked materials and sanding debris in a metal container completely filled with water and close the container tightly. Dispose of waste in accordance with local fire regulations.
Do not leave soaked cloths rolled, folded, or piled up in one place. Store the product in its original, tightly closed container in a cool, well-ventilated place, away from sources of ignition. Do not transfer it to other containers for storage.
Danger: the product is flammable, contains solvents and harmful fumes. Store and use away from heat, hot surfaces, sparks, open flames, and other ignition sources. Do not smoke while working.
Size: L
Товар из Польши
Возврат по недоставке
