Minwax Tung Oil Finish – a tung oil-based wood finish
Minwax Tung Oil Finish is a clear oil-resin preparation for protecting interior wood. It penetrates deep into the wood's pores, accentuating the natural grain, and creating a durable finish with an elegant, hand-rubbed sheen.
This product works particularly well on refinished wood. It helps refresh dry, dull surfaces and restore their depth of color. The hardened layer provides protection against water, stains, abrasion and wear, and its subsequent maintenance is easy - the wood's appearance can be restored by applying another layer of the preparation.
• Creates a durable finish with a hand-rubbed gloss effect.
• Emphasizes the natural color and grain.
• Penetrates deeply into the wood pores.
• Helps restore the attractive appearance of dry and restored wood.
• Protects the surface against water, stains, abrasion and everyday wear.
• Provides an even effect without visible streaks.
• Can be applied by hand with a cloth or brush.
• Suitable for both raw, restored and and previously stained wood.
• It is easy to maintain later.
• It allows for periodic refreshing of the surface by applying another layer.
The preparation is intended for finishing wooden elements used indoors, such as:
• tables, chairs, chests of drawers and other furniture,
• wooden countertops and shelves,
• doors, moldings and finishing elements,
• decorations and objects made of wood,
• surfaces made of raw or previously stained wood,
• wooden elements undergoing renovation.
The product is not intended for floors or surfaces used outdoors.
1. The surface should be clean, dry, and free of dust, grease, wax, and old, flaking coatings.
2. Sand raw or refinished wood thoroughly in the direction of the grain, then remove any dust.
3. Stir the product thoroughly before use. Do not shake the container.
4. Apply an even layer using a clean, lint-free cloth or a good quality brush.
5. Leave the product on the surface for approximately 5-10 minutes to penetrate the pores of the wood.
6. Carefully wipe off any excess with a clean cloth, working in the direction of the grain. Do not leave unwiped product on the surface.
7. Leave the wood to dry for 24 hours.
8. For better protection and a deeper shine, apply a second coat. Additional layers can be applied depending on the desired effect.
9. In the future, the surface can be refreshed by applying another layer to clean, dry wood.
Drying time may be longer at low temperatures, high humidity, or limited ventilation.
• Product type: penetrating oil-resin finish for wood
• Composition: alkyd resin based on tung oil, additives and drying agents in mineral solvent
• Intended use: indoor wood
• Coating color: colorless
• Effect: durable, hand-rubbed gloss that highlights the grain
• Time before removal 5–10 minutes
• Recoating time: approximately 24 hours
• Recommended number of coats: at least 2
• Coverage: approximately 11.6–13.9 m² from a 946 ml package
• Capacity: 946 ml
• Application method: cloth or brush
• Cleaning of tools: mineral solvent
• Tilution: not recommended
Important Safety Information
This product contains solvents and is flammable. Use with adequate ventilation, away from heat, sparks, and open flames.
Cloths soaked in this product may spontaneously combust. Immediately after use, place them in a tightly closed metal container filled with water and dispose of according to local regulations. Keep out of reach of children.
Size: L
Товар из Польши
Возврат по недоставке
