Minwax Helmsman Teak Oil 946 ml – Oil for Furniture and Dense Wood Surfaces with UV Protection
Minwax Helmsman Teak Oil is a clear, penetrating oil designed to care for and protect dense wood species. It penetrates the pores of the material, accentuating the natural grain, and helping restore the wood's warm, rich appearance.
This product is recommended for indoor and outdoor wooden furniture, as well as for wooden surfaces on vessels located above the waterline. Regularly renewed coating helps protect dense wood from UV radiation.
The clear base coat does not impart a specific color to the wood, but it can deepen its natural color and enhance the grain. Before use, always test on an inconspicuous area.
• Penetrates the pores of dense wood species.
• Emphasizes the natural grain.
• Helps restore the wood's natural warmth and color depth.
• With regular refinishing, it helps protect the material from UV radiation.
• Suitable for indoor and outdoor furniture.
• Can be used on wooden surfaces of vessels above the waterline.
• Suitable for bare wood and surfaces completely cleaned of old coatings.
• Can be applied with a brush or a soft cloth.
• Requires two subsequent coats in one application cycle.
• The surface is ready for use. after approximately 6-8 hours.
Minwax Helmsman Teak Oil is recommended for, among others:
• Outdoor furniture made of teak and other dense wood species,
• Tables, chairs, benches and deck chairs,
• Furniture and interior furnishings made of dense wood,
• Wooden decorative elements,
• Wooden surfaces on boats and other vessels located above the waterline,
• Other vertical or furniture surfaces made of untreated or completely cleaned, dense wood.
Current manufacturer's recommendations cover primarily wooden furniture and surfaces of vessels above the waterline. The manufacturer does not indicate terraces or decking as a recommended use, therefore the product should not be presented as a specialized decking oil.
For horizontal walking surfaces, choose a product designed specifically for decking.
1. The wood must be completely dry.
2. Remove dust, dirt, grease, and other contaminants.
4. Ensure there is no subsurface moisture in the wood.
5. If necessary, sand the wood to achieve a smooth and even surface.
6. Carefully remove all sanding dust.
7. Test on a small, inconspicuous area.
Use appropriate protective equipment, properly contain dust, and thoroughly clean the work area.
How to use
1. Gently shake the can for 15-20 seconds.
2. Using a brush or soft cloth, apply a generous, even coat of oil.
3. Leave the product on the wood for 5-10 minutes to penetrate the pores. Do not remove any excess at this stage.
4. Apply a second coat of oil.
5. Leave it on the surface for another 15–20 minutes.
6. Do not leave the product on the wood for more than 30 minutes in total.
7. After penetration, thoroughly wipe the entire surface dry. Do not leave any wet, sticky, or shiny areas.
8. Leave the surface to dry in a well-ventilated area.
9. The surface is ready for use after approximately 6-8 hours.
Drying times may be longer at low temperatures, high humidity, poor ventilation, or on poorly absorbent wood. If the instructions on the packaging differ from the above, refer to the product label.
The condition of the wood should be checked regularly, especially for furniture used outdoors. When the surface begins to look dry, loses color intensity, or becomes uneven, clean, dry completely, and re-oil according to the manufacturer's instructions.
The frequency of re-oiling depends on the species and absorbency of the wood, the intensity of use, and exposure to sun and weather conditions.
• Product type: penetrating oil for dense wood species
• Base: solvent-based
• Base color: colorless
• Effect: highlights the natural color and grain of the wood
• Application: wooden furniture inside and outside and surfaces of vessels above the waterline
• Protection: helps protect wood from UV radiation when periodically renovating
• Application method: brush or soft cloth
• Recommended application cycle: 2 layers
• Penetration time of the first layer: 5–10 minutes
• Time after applying the second layer: 15–20 minutes
• Maximum total time the product remains unwiped: 30 minutes
• Time to start using: approximately 6–8 hours
• Efficiency: depends on the species, absorbency and preparation of the wood; The current manufacturer's website does not provide a numerical value.
• Capacity: 946 ml (1 US quart)
• Product number: 027426671003
• Manufacturer: Minwax Company
• Brand country of origin: USA
Important safety information
Use only outdoors or in a very well-ventilated area. Ensure a constant supply of fresh air during application and drying. Do not inhale vapors or mists.
Wear gloves, protective clothing, and eye/face protection. Avoid contact of the product with skin, eyes, and clothing. The product may cause an allergic reaction. Wash hands thoroughly after finishing work. Pregnant people should avoid exposure to the product.
Swallowing the product and inhaling it may be fatal. If swallowed, do not induce vomiting and contact a doctor or poison control center immediately.
In case of skin contact, remove contaminated clothing and wash the affected area thoroughly with soap and water.
Prolonged or repeated exposure to solvent vapors may damage organs, the brain, and the nervous system. This product may damage fertility or the unborn child and is suspected of causing cancer. Read all warnings on the label and safety data sheet before use.
Spontaneous combustion hazard
Cloths, steel wool, sanding dust, and other materials soaked in this product may spontaneously ignite if left or disposed of improperly.
Immediately after use, place all soaked materials in a metal container completely filled with water and seal it tightly. Dispose of waste in accordance with local fire regulations. Do not leave soaked wipes rolled, folded, or piled up.
Store the product in its original, tightly closed packaging, upright, in a cool, dry, and well-ventilated place. Protect from direct sunlight and sources of ignition. Do not transfer to other containers.
Store away from food, drink, and oxidizing materials, in a locked place and out of the reach of children. Dispose of contents and packaging in accordance with local regulations.
Danger: the product is flammable and contains solvents. Store and use away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke during use.
Товар из Польши
Возврат по недоставке
