Anycubic DLP Craftsman Gray 1 kg

Anycubic DLP Craftsman Grey UV Resin 1kg PRECISION For 3D Printers Manufacturer: Anycubic Series: DLP Craftsman Color: Grey Capacity: 1 kg High print quality - Anycubic DLP Craftsman resin delivers excellent quality prints with crisp details and smooth surface. Long Shelf Life - Anycubic DLP Craftsman resin, thanks to improved formula, has a shelf life of up to one and a half years. Fast Prints and Minimal Shrinkage – The improved Anycubic DLP Craftsman resin formula provides lightning-fast layer curing (just 2 seconds per layer) and exceptionally low molding shrinkage – only 3.7%, making prints precise , stable and accurately reproduce the design – what you see is what you get. Resin Characteristics: Anycubic DLP Craftsman is a high-quality resin created specifically for DLP 3D printers. It delivers exceptionally precise and smooth prints, ideal for collectible models, figurines, prototypes, and decorative items. Thanks to nanoceramic additives, it guarantees sharp details and perfect reproduction without visible layer lines. The improved formula enables fast layer curing and low shrinkage, which ensures dimensional stability and saves time during printing. A long shelf life – up to a year and a half – makes the resin reliable and durable. It's the perfect choice for creators who value quality, precision and efficiency in every print. Parameters: Manufacturer: Anycubic Series: DLP Craftsman Color: Gray, Gray Capacity: 1 kg Wavelength: 405nm Density: 1.15-1.20g/cm³ Viscosity: 200-300 mPa s Hardness: 80-83HD Tensile strength: 32-43MPa Elongation at break: 11-14% Forming shrinkage: 4.2-5.5% Flexural strength: 50-60MPa Flexural modulus: 1500-1600 MPa Young's modulus: 1300-1500 MPa Storage period: 18msc Usage information: Exposure time for a 0.050mm layer is 1.5-3.5 sec. For the first 10 layers, set the time to about 15-30 sec and apply 10-15 transition layers. Wash the print in alcohol isopropyl alcohol IPA for up to 5 min. After printing, pour the rest into the bottle through resin filters . General information: Before use shake for about 30 seconds and wait 5 min until air is released. Print at room temperature 20-30 ℃ and store the resin in a closed bottle. Use protective gloves and work in a well-ventilated room. The given exposure times may vary, this is an approximate value for most new printers. The package contains 1kg +-5% of material. Color and material properties may vary depending on the printing, washing and curing process. Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] Signal word: WARNING Names of hazardous ingredients on the label: Contains: 2-Oxepanone, homopolymer, 2-[(1-oxo-2-propen-1-yl)oxy]ethyl ester; Pentaerythritol, ethoxylated, esters with acrylic acid; Diphenyl(2,4,6-trimethylbenzoyl)phosphane oxide. Hazard Statements (H): H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H335 May cause respiratory irritation. H361f Suspected of damaging fertility. H411 Toxic to aquatic life with long lasting effects. Precautionary Statements (P): Prevention: P201 Obtain special instructions before use. P261 Avoid breathing vapours, spray. P273 Avoid release to the environment. P280 - Wear protective gloves, protective clothing, eye protection, face protection. Response: P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P302+P352 - IF ON SKIN: Wash with plenty of water. Disposal: P501 - Dispose of contents or container to an authorized waste disposal plant. In all cases, follow the information on the product label.