Anycubic Standard Translucent Red 1kg

Anycubic Standard Transculent Red UV Resin Red 1l 1kg for 3D printer Manufacturer: Anycubic Series: Standard Color: Translucent Red, Transparent Red Capacity: 1kg Anycubic Standard Universal Resin - Perfect balance between precision and price. The best choice for beginners. Easy to use, fast printing - For most 3D printers, the exposure time is 1.5 - 2.5 seconds. Tough and precise - Well suited for hobby printing, e.g. gaming miniature models. Anycubic Standard resin works with most 3D printers - Anycubic, Elegoo, Phrozen, Creality, Zortax and other LCD, DLP with a light wavelength of 365 - 405 nm. Resin characteristics: Anycubic Standard is a universal resin, ensuring good print quality. Perfect for utility models, figurines, prototypes, and decorative elements. It provides high detail accuracy and a smooth surface, reducing the need for additional processing. Low shrinkage minimizes the risk of cracks and deformation, ensuring print stability. It is characterized by good fluidity and a short curing time, which speeds up the entire process. A less intense odor and easy handling increase work comfort. It is a universal solution for anyone who expects quality, reliability and convenience. Parameters: Manufacturer: Anycubic Series: Standard Color: Translucent Red Capacity: 1kg Wavelength: 405nm Density: 1.13g/cm³ Viscosity: 200-300cP·mPa·s Hardness: 84-86HS Tensile strength: 40-50MPa Elongation at break: 12-16% Forming shrinkage: 4.5-5.5% Bending strength: 50-60MPa Storage period: 18msc Information on use: Exposure time for a layer of 0.050mm to 1.5-3.5 sec. For the first 10 layers, set the time to about 15-30 seconds and apply 10-15 transition layers. Wash the print in isopropyl alcohol IPA for up to 5 min. After printing, pour the rest into the bottle through resin filters . General Information: Before use shake for about 30 seconds and wait 5 min until air is released. Print at room temperature 20-30℃ and store the resin in a closed bottle. Use protective gloves and work in a well-ventilated room. The exposure times given may vary; this is an approximate value for most new printers. The package contains 1kg +-5% of material. Color and material properties may vary depending on the printing, washing, and curing process. Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP]: GHS07 Signal word: WARNING Names of hazardous ingredients on the label: Contains: 2-oxapyranone homopolymer, 2-[[(1-oxo-2-propen-1-yl)oxy]ethyl ester;,2,2'-(ethylenedioxy)diethyl diacrylate; Triethyleneglycol diacrylate; 2-[[2,2-bis[(1-oxoallyl)oxy]methyl]butoxy]methyl]-2-ethyl-1,3-propanediyl diacrylate; Diphenyl(2,4,6-trimethylbenzo-yl)phosphine oxide Hazard Statements (H): H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. Precautionary Statements (P): Prevention: P264 - Wash hands thoroughly after handling the product. P280 - Wear protective gloves, protective clothing, eye protection, face protection. Response: P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P302+P352 - IF ON SKIN: Wash with plenty of water. Disposal: P501 - Dispose of contents or container to an authorized waste disposal plant. Supplemental Hazard Statements: EUH205 - Contains epoxy ingredients. May produce an allergic reaction. In all cases, follow the information on the product label. FAQ – Frequently Asked Questions Does Anycubic Standard resin work with 405nm UV printers? Yes, Anycubic Standard series resins are compatible with most MSLA, LCD, and DLP printers operating at a 405nm wavelength, such as Anycubic, Elegoo, Phrozen, and many other models. Do the Standard series resins have a noticeable odor during printing? The Standard series has a less intense odor than many other UV resins. However, it is recommended to print in a well-ventilated area and to wear protective gloves. Can the color of prints differ from the color of the resin in the bottle? Yes, the color of prints may vary depending on exposure time, model wall thickness, washing process, and final curing. Thicker elements may have a more intense color, while thinner parts may be lighter. What mechanical properties do Anycubic Standard resins offer? Standard resins offer a balance between hardness and precision. They offer high detail accuracy, a smooth surface, low shrinkage, and good dimensional stability. The material is hard and intended primarily for visual models and prototypes. How should I properly dispose of the remaining resin after printing? After printing, any remaining resin should be filtered and returned to the original bottle. Uncured resin should not be disposed of in the regular trash—it should be taken to an appropriate chemical waste disposal point.