Anycubic Abs-like Pro 2 Gray 1kg

UV Resin Anycubic Abs-like Pro 2 Grey 1kg 1l For 3D printer Manufacturer: Anycubic Series: ABS-Like Pro 2 Color: Grey Capacity: 1kg, 1l High mechanical resistance – Ideal for creating functional prototypes and technical parts that must withstand loads and impacts. Balanced flexibility and stiffness – Printed models are solid but not brittle, which increases their durability in practical use. Smooth finish and precise detail – Excellent surface quality allows for aesthetic and detailed _ prints without the need for additional post-processing. Minimal odor – Reduced odor emission during printing increases work comfort. Resin characteristics: Anycubic ABS-Like Pro 2 resin created for prints requiring strength and durability. It combines stiffness with flexibility , making models resistant to cracking, yet not brittle. The resin is characterized by low shrinkage, high precision, and faster curing times, resulting in an efficient and reliable printing process. Ideal for functional parts, technical prototypes, and engineering applications. Parameters: Manufacturer: Anycubic Series: ABS-Like Pro 2 Color: Gray, Gray Capacity: 1kg, 1l Wavelength: 365-405nm Density: 1.1-1.2g/cm³ Viscosity: 180-200 cP·mPa·s Hardness: 80-85D Tensile strength: 35-45 MPa Elongation at break: 30-40% Bending strength: 40-50 MPa Bending modulus: >1000-1200 MPa Heat deflection temperature: >60-65℃ Forming shrinkage: 4.3-5.6% Resin wash: Alcohol Usage information: Exposure time for a 0.050mm layer is 1.5-3.5 sec. For the first 10 layers, set the time to about 15-30 sec and apply 10-15 transition layers. Wash the print in alcohol isopropyl alcohol IPA for up to 5 min. After printing, pour the rest into the bottle through resin filters . General information: Before use shake for about 30 seconds and wait 5 min until air is released. Print at room temperature 20-30 ℃ and store the resin in a closed bottle. Use protective gloves and work in a well-ventilated room. The given exposure times may vary, this is an approximate value for most new printers. The package contains 0kg +-5% of material. Color and material properties may vary depending on the printing, washing and curing process. GHS label elements - GHS05/GHS07/GHS09 Classification according to Regulation (EC) No. 1272/2008 Signal word: Danger Names of hazardous ingredients on the label: Poly(propylene glycol) diacrylate; 7,7,9 (or 7,9,9)-trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecane-1,16-diyl bismethacrylate; (Octahydro-4,7-methano-1H-indenediyl)bis(methylene) diacrylate Hazard statement(s) H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H411 Toxic to aquatic life with long lasting effects. Precautionary Statement(s) (P) Prevention P201 Obtain special instructions before use. P261 Avoid breathing vapours, spray. P273 Avoid release to the environment. P280 Wear protective gloves, protective clothing, eye protection, or face protection. Response: P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P302+P352 IF ON SKIN: Wash with plenty of water. Disposal: P501 Dispose of contents or container to an authorized waste disposal plant. Other hazards: The substances contained in the product do not meet the PBT or vPvB criteria in accordance with Annex XIII of the REACH regulation. PBT substances (persistent, bioaccumulative and toxic substances) vPvB substances (very persistent and very bioaccumulative substances) Ecological information: The mixture does not contain components considered to have endocrine-active properties towards the environment, according to REACH Article 57(f), Commission Regulation (EU) 2018/605 or Commission Delegated Regulation (EU) 2017/2100. Toxicological information: The mixture does not contain ingredients considered to have endocrine disrupting properties according to Article 57(f) of REACH Commission Regulation (EU) 2018/605 or Commission Delegated Regulation (EU) 2017/2100 at levels of 0.1% or higher. In all cases, follow the information on the product label.