Anycubic Plant-Based 2.0 Gray 1kg

Anycubic Plant-Based UV Resin 2.0 Grey 1kg BIO For 3D Printers Manufacturer: Anycubic Series: Plant-Based 2.0 Color: Grey Capacity: 1kg Neutral odor and work comfort - Compared to traditional resins, the plant-based 2.0 version emits minimal odor, which significantly improves printing comfort – especially in home conditions. Fast curing and time saving - The resin has been optimized for shorter exposure time, reducing printing time without sacrificing quality. Convenient model finishing - Prints have a smooth surface, they accept paints and primers well - ideal for collectible models, figurines and DIY projects. Resin characteristics: Anycubic Plant-Based Resin 2.0 is an eco-friendly plant-based resin created for safe and more environmentally friendly 3D printing. Compared to the previous version, it features improved dimensional stability, better mechanical resistance and less shrinkage during curing. With its low odor, it is an excellent choice for indoor use. It provides good detail, a smooth surface finish, and high color consistency. Compatible with most LCD/DLP 3D printers (405 nm), works great for creating decorative models, prototypes and hobby projects. Parameters: Manufacturer: Anycubic Series: Plant-Based 2.0 Color: Grey, Gray Capacity: 1kg Wavelength: 365-405nmnm Density: 1.09-1.1 g/cm³ Viscosity: 300 -350 MPa s (25°C) Hardness: 81-83D Tensile strength: 35-40 MPa Elongation at break: 18-20% Flexural strength: 42-48MPa Flexural modulus: 1400-1600MPa Printing temperature: 20-50 °C Usage information: Exposure time for a 0.050mm layer is 1.5-3.5 sec. For the first 10 layers, set the time to about 15-30 sec and apply 10-15 transition layers. Wash the print in isopropyl alcohol IPA for up to 5 min. After printing, pour the rest into the bottle through resin filters . General information: Before use shake for about 30 seconds and wait 5 min until air is released. Print at room temperature 20-30 ℃ and store the resin in a closed bottle. Use protective gloves and work in a well-ventilated room. The given exposure times may vary, this is an approximate value for most new printers. The package contains 1kg +-5% of material. Color and material properties may vary depending on the printing, washing and curing process. GHS label elements - GHS07 Labeling according to Regulation (EC) No. 1272/2008 [CLP] Signal word: Warning Contains: Glycerol propoxylated, esters with acrylic acid, 2,2'-(ethylenedioxy)diethyldiacrylate; Triethylene glycol diacrylate, Propylidinotrimethanol, ethoxylated, esters with acrylic acid, 2-[4-(2-{4-[2-(prop-2-enoyloxy)ethoxy]phenyl}propan-2-yl)phenoxy]ethyl prop-2-enoate, phenyl bis(2,4,6-trimethylbenzoyl)phosphine oxide Hazard statements (CLP): H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H412 - Harmful to aquatic life with long lasting effects. Precautionary statements (CLP): Prevention: P261 - Avoid breathing dust. P264 - Wash hands, forearms and face thoroughly after handling the product. P273 - Avoid release to the environment. P280 - Wear protective gloves, protective clothing, eye protection, face protection. Response: P302+P352 - IF ON SKIN: Wash with plenty of water. Disposal: P501 - Dispose of contents and container to a collection point for hazardous or special waste in accordance with local, regional, national and/or international regulations. In all cases, follow the information on the product label.