TechniSat 4Z WB Wideband SAT 4-Track Linear Amplifier

? Loss compensation and perfect signal – TechniSat 4Z WB linear amplifier

Are you planning an extensive satellite installation in a large house, guesthouse or multi-family building and are concerned about signal quality drops over long cable runs? The TechniSat 4Z WB linear amplifier (0000/3244) is a professional solution designed to compensate for attenuation in satellite buses and cascade installations.

The device supports 4 independent signal paths and is fully adapted to modern Wideband technology and traditional 4-cable buses. Thanks to it, you will deliver a crystal-clear HD and 4K UHD signal even to the most remote reception points.

? Key advantages of the TechniSat 4Z WB amplifier:

• ? Wideband technology support: Works with both modern WB broadband installations and traditional bus systems.

• ⚡ 4 independent amplification paths: Allows simultaneous increase of the signal level for all four satellite bands without distortion.

• ?️ Precise adjustment: Built-in potentiometers allow you to perfectly balance the signal level in the installation and avoid overdriving the tuners.

⚙️ Shielded housing and stability in cascade installations

Long cable runs between the antenna and multiswitches generate significant signal attenuation. The TechniSat 4Z WB amplifier eliminates this problem, restoring optimal transmission parameters.

The solid, die-cast metal alloy housing provides the highest class of shielding, protecting the TV signal from external interference (e.g. from LTE/5G cellular networks). The well-thought-out F-connector layout allows for quick and aesthetic installation directly on the cable trunk or in a telecommunications cabinet.

? Technical data and exact set contents

• Model: 4Z WB linear amplifier (code: 0000/3244)

• Number of inputs/outputs: 4x SAT input / 4x SAT output

• Supported technology: Wideband (WB) / Quattro bus

• Frequency range: 290 - 2340 MHz

• SAT path gain: Adjustable to 15...20 dB (depending on the band)

• Gain adjustment range: 0 ... 10 dB

• Connector type: F (75 Ohm)

• Power supply: Loop-through from the bus or from an external power supply

• Country of manufacture: Germany (Made in Germany)

? What exactly will you find in the box:

• TechniSat 4Z WB linear amplifier

• Set of mounting screws

• User manual in Polish

? Knowledge base - Check before installation!

When should a linear amplifier be used in an installation? A linear amplifier is used in situations where the distance between the LNB/antenna and the multiswitch (or between subsequent multiswitches in a cascade) exceeds several dozen meters, causing a drop in signal strength and image jams on decoders.

What does the abbreviation "WB" (Wideband) mean? Wideband is a modern satellite transmission standard that transmits the entire frequency range from the satellite using just two cables (instead of four as in a traditional Quattro LNB). This amplifier is adapted to work in such modern systems.

Does the amplifier require a separate power supply? The device has a power pass-through, which means that in many configurations it can be powered directly from the system bus or a connected multiswitch.

? Ensure the stability of your installation and eliminate signal drops! Order your TechniSat 4Z WB professional amplifier today!