Linear Amplifier 18dB DVB-S2 SAT TechniSat 0001/3127

? TECHNISAT 18 dB SAT LINEAR AMPLIFIER – STABLE SIGNAL IN LONG INSTALLATIONS

Are you having problems with satellite TV signal drop over long distances? The TechniSat linear amplifier (0001/3127) is a professional solution that allows you to compensate for signal losses occurring in coaxial cabling.

It provides signal amplification in the satellite band of up to 18 dB, which guarantees stable and interference-free reception even when the decoder is far from the LNB sensor. The device operates in a loop-through mode and draws power directly from the antenna cable, eliminating the need for additional power supplies.

? Key features of the device:

• ? Up to 18 dB amplification: Effectively compensates for satellite signal attenuation (950 – 2150 MHz) occurring on long cable runs.

• ⚡ DC Pass Power: Passes DC voltage from the tuners directly to the LNB – no unnecessary cables or power supplies.

• ?️ F-type connectors: Designed for quick screw-on installation onto a standard coaxial cable.

• ?? Solid housing: The resistant construction of the TechniSat brand guarantees long and stable operation of the entire system.

⚙️ Why is it worth using this product?

In extensive home installations or when the distance between the satellite dish and the tuner is large, the signal is significantly attenuated, which manifests itself as pixelation or image loss in bad weather.

Connecting this amplifier to the antenna line increases the signal level to the optimal value, ensuring continuous reception without the need to replace the entire installation with a new one.

? Technical specifications:

• Manufacturer: TechniSat

• Model: 0001/3127

• EAN: 4019588131279

• Frequency range: 950 x 2150 MHz (SAT band)

• Gain: 18 dB

• Voltage pass-through (DC Pass): Yes (max. 500 mA)

• Connector type: F socket / F socket

• Impedance: 75 Ohm

• Application: Indoor

? Kit contents:

• Original TechniSat linear amplifier (0001/3127)

? Frequently asked questions (FAQ):

❓ Where is the best installation location to mount this amplifier? The linear amplifier should be mounted closer to the antenna/LNB (usually at the beginning or in the middle of a long cable section), and not right next to the decoder itself, to amplify a clean signal and not noise accumulated along the entire length.

❓ Will this amplifier also amplify the DVB-T2 terrestrial television signal? No. It is an amplifier dedicated to the satellite band (950 x 2150 MHz). For terrestrial television, amplifiers operating in the VHF/UHF band should be used.