Hydrogel Tile Adhesive Cekol Q4

Cekol Q4 Hydrogel Tile Adhesive 20 kg

Cekol's universal tile adhesive allows you to install ceramic tiles in areas such as swimming pools, fountains, balconies, and terraces. It is suitable for installing ceramic, stoneware, stoneware, glass, mineral wool, and polystyrene tiles on concrete, brick, aerated concrete, expanded clay blocks, gypsum boards, plasterboard, and stable wood-based surfaces.

This tile adhesive is a flexible cement mortar characterized by improved technical parameters, reduced runoff, and extended open time. The product is especially recommended for use on heated surfaces.

Product advantages and features

It is distinguished by increased adhesion.

Thanks to a carefully selected formula, it is highly resistant to sagging.

Universal - ideal for installing ceramic tiles in swimming pools, fountains, on balconies and terraces.

Suitable for installing ceramic, stoneware, stone and glass tiles, as well as mineral wool and polystyrene on concrete, brick, aerated concrete, expanded clay blocks, plasterboards, plasterboards and stable wood-based substrates.

Substrate preparation

The substrate should be clean, compact and free from grease. Any residues of emulsion and oil paints and loose sand grains should be removed with a spatula or a rough cloth. brushes.

Execution

Applying the waterproofing layer. To achieve tightness, use CEKOL ZU-1 single-component sealing mortar or CEKOL ZU-2 two-component sealing mortar. Mortar preparation. Prepare the mortar by pouring 1 kg of powder into 0.23 – 0.25 l of water (4.6 – 5 l of water per 20 kg bag), then mix thoroughly with a low-speed mixer until uniform. Wait approximately 3 minutes and mix thoroughly again. Mortar use-by time: approximately 3 hours.

Applying the adhesive. Apply the adhesive to the prepared substrate using a notched trowel. In the case of heated surfaces, turn off the heating before laying the tiles. It can be turned on at least 7 days after laying the tiles. When gluing highly absorbent tiles and stoneware tiles outdoors, CEKOL Q-4 PLUS should be applied in a continuous layer both to the substrate and to the underside of the tiles, which will significantly increase adhesion. In places exposed to water leakage, apply a waterproofing layer.

Storage

Store in dry rooms, in original packaging.

Parameters:

Brand: Cekol

Capacity: 20 kg

Application: Notched trowel

Adhesive class: C2TES1

Joint strength expressed as: Initial adhesion ≥ 1 N/mm²

Joint durability under conditioning/thermal aging conditions expressed as: Adhesion after thermal aging ≥ 1 N/mm²

Joint durability under water/humidity conditions expressed as:

Adhesion after immersion in water ≥ 1 N/mm²

Joint durability under freeze-thaw cycles expressed as:

Adhesion after freeze-thaw cycles ≥ 1 N/mm²

Mixing proportions: 0.23 to 0.25 l of water per 1 kg of dry powder

Tile correction time: 10 minutes

Coverage: approximately 2.7 kg/m² when using a 10 mm notched trowel

Layer thickness: Up to 20 mm

Application and substrate temperature: + 5°C to + 25°C

Suitability for foot traffic and grouting: Approx. 24 hours at 18°C

Reaction to fire: A1/A1fl

The product has: Hygiene certificate

Application: Tile adhesive

The price is for one piece

Brand: Cekol Application: Tile adhesive Thickness: Up to 20 mm