Gypsum Adhesive for Plasterboard GS-20

Gypsum adhesive for plasterboards Cekol GS-20 20 kg

The adhesive for gluing plasterboards and stucco, as well as gypsum blocks, is characterized by excellent adhesion. It is also used to fill cracks and scratches on the surface of walls and ceilings.

Cekol GS-20 is a product based on polymers, mineral fillers, and modifying agents. It is recommended for indoor use only.

Product advantages and features - It is characterized by high durability and high quality. - Thanks to its precisely selected formula, it is highly resistant to flow. - Crack-resistant and sufficiently flexible. - It can also be used on cracks and scratches. - It is completely ecological and does not contain harmful ingredients.

Substrate preparation

Plasterboards should be mounted in a stable and load-bearing manner. Clean the grooves thoroughly before grouting. In the case of cut edges, widen the groove and thoroughly clean off any dust. Non-originally finished board edges should be thoroughly primed with a deep-penetrating primer.

Application

After mixing, the product should be applied to the surface using stainless steel or plastic tools. The groove should be carefully filled and allowed to dry. If necessary, repeat the process after approximately 24 hours. After drying, surface corrections can be made using a sanding mesh or sandpaper.

Storage

Store in original packaging, in dry and dark rooms, away from heat sources, protect from overheating and frost.

Parameters: - Brand: Cekol - Capacity: 20 kg - Maximum layer thickness: approx. 10 mm - Efficiency: 3-5 kg/m2 - Drying time: Depends on the layer thickness and environmental conditions, it is assumed that the layer dries at 10 mm per day. - The product has:Hygiene certificate - Application: Adhesive for plasterboards, stucco - Price is for one package

Brand: Cekol Thickness: approx. 10 mm Application: Adhesive for plasterboards, stucco