Hybrid Tile Adhesive Q5 Pro

Cekol Q5 Pro Hybrid Tile Adhesive 5 kg

Hydrophobic tile adhesive from the Cekol brand allows you to glue marble, granite, stone, ceramic tiles, and glass mosaics to mineral substrates. Due to its color, there is no risk of discoloration on the tile surface.

The tile adhesive is waterproof, frost-resistant, and flexible. Suitable for indoor and outdoor use. It allows you to glue tiles from the top. The product is fiber-reinforced.

It is recommended for gluing tiles to standard and heated surfaces. The use of cement as a binder significantly reduces the risk of discoloration on the tiles. Possibility of filling and leveling substrates.

Product advantages and features - The product is a flexible, frost-resistant and waterproof adhesive mortar for use indoors and outdoors. - It is characterized by increased adhesion. - Thanks to a precisely selected formula, it is highly resistant to flow, which allows gluing tiles from above. - Universal - for marble, granite, stone, ceramic tiles and glass mosaics on mineral substrates. - The use of cement as a binder significantly reduces the risk of discoloration on the tiles. - Reinforced with fiber.

Substrate preparation

The substrate should be clean, compact and free of grease, any Remains of emulsion and oil paints, as well as loose sand grains, should be removed with a spatula or a rough brush.

Priming

Highly absorbent substrates should be primed with a deep-penetrating primer.

Execution

Preparing the mortar. Prepare the mortar by pouring 1 kg of powder into 0.25 – 0.27 l of water (5 – 5.4 l of water per 20 kg bag), and then mix thoroughly with a low-speed mixer until a uniform consistency is achieved. Wait approximately 3 minutes and mix thoroughly again. The mortar should be used for approximately 3 hours.

Applying the adhesive. Apply the adhesive to the prepared substrate using a notched trowel. For outdoor use and to improve the adhesion of highly absorbent tiles and stoneware, CEKOL Q-5 PRO should be applied in a continuous layer to both the substrate and the underside of the tiles. Before applying CEKOL Q-5 PRO to heated surfaces, turn off the heating. The tiles can be switched on after at least 7 days have passed since the tiles were laid.

Storage

Store in dry rooms, in original packaging.

Parameters: - Brand: Cekol - Color: - Capacity: 5 kg - Application: Notched trowel - Adhesive class: C2TE - Joint strength expressed as: Initial adhesion ≥ 1 N/mm² - Joint durability under conditioning/thermal aging conditions expressed as: Adhesion after thermal aging ≥ 1 N/mm² - Joint durability under water/humidity conditions expressed as: adhesion after immersion in water ≥ 1 N/mm² - Joint durability under freeze-thaw cycles expressed as: adhesion after freeze-thaw cycles ≥ 1 N/mm² - Mixing ratio: 0.25 to 0.27 l of water per 1 kg of dry powder - Tile correction time: 10 minutes - Coverage: Approximately 2.7 kg/m² using a 10 mm notched trowel - Layer thickness: Up to 20 mm - Application and substrate temperature: + 5°C to + 25°C - Suitable for foot traffic and grouting: Approx. 24 hours at 18°C - Reaction to fire: A1/A1fl - The product has: Hygiene certificate - Slippage (T) ≤ 0.5 mm - Extended open time (E) adhesion: ≥ 0.5 N/mm2 after a time of not less than 30 min - Application: Tile adhesive - Price is for one piece

Brand: Cekol Application: Tile adhesive Thickness: Up to 20 mm