RADILA(Radio Technologies Laboratory) RADILA Fujikura Coaxial Cable 3m Low SWR Low Loss Includes actual measurement data for amateur radio mobile use

RADILA is a manufacturer of wireless equipment. ▸Although not widely known, we have delivered tens of thousands of cable products to customers as a manufacturing contractor for well-known wireless equipment manufacturers. ▸To meet the demand for high-performance cables, we launched the RADILA brand and began manufacturing and selling original products focused on performance. ▸Many of RADILA's engineers have experience in defense technology, and RADILA products are infused with the know-how gained from that field. ▸We deliver high-quality products to our customers in terms of materials, manufacturing technology, and quality control. Low SWR specification. ▸SWR is proportional to frequency and becomes an important factor beyond the HF band. ▸Connector selection is crucial above 145MHz, and especially in the 430MHz band, the SWR changes significantly depending on the connector selection. ▸RADILA products gather and measure numerous connectors from both domestic and international sources to select the best one, and the method of attaching them to the cable is also independently tested to achieve the best performance. Low loss. ▸Loss is greatly influenced not only by the connector's SWR but also by the cable's attenuation rate. ▸Even for mobile applications with lengths of a few meters, the attenuation rate is not negligible and is considered a problem. ▸There are limits to the cable thickness depending on the application, so if the thickness is the same, the type must be chosen. ▸This product is a reasonably priced 5D-FB-LITE. ▸Fujikura Dia Cable's FB-LITE series has loss performance equivalent to thick 8D-2V cables, making it extremely low loss. ▸Furthermore, because the internal conductor is CA wire (aluminum clad wire), the specific gravity is less than half that of FB while maintaining electrical performance, making it lightweight and easy to use. ▸The outer sheath is also made of matte black PVC material, which is soft and smooth. Actual measurement data attached (SWR and pass-through loss) ▸While cable product inspections usually only check for continuity and insulation, RADILA products also measure SWR, pass-through loss, phase, etc. using a VNA (Vector Network Analyzer). ▸Measurements are performed on 100% of the products, not by sampling. ▸All products are affixed with serial numbers to ensure thorough quality control. MP connectors use metric screws. ▸Regarding M-type connectors, currently, in Japan, there are two types of M-type connectors: those that use metric screws according to JIS standards, and UHF connectors (such as PL259 and SO239) that use inch screws. ▸There is no external difference between the two, making them indistinguishable, but there is a difference in whether the screws can be tightened all the way when fitted together. ▸RADILA products use M-type connectors with metric screws.