Printing Workshop Transfer Sheet Application Sheet 220mm x 10m [Medium Adhesion] Width 22cm

This is a transfer sheet (application sheet) necessary for applying cutting sheets.

Transparent film type.

Can be used with various sheets from Graphtec, Roland DG, Max, etc.

Thickness: 50μm (0.05mm) Adhesive strength: Medium (2.8N/25mm) Adhesive strength stability: ○

Transfer Sheet (Application Sheet)

'Features' ・PET film with release liner ・Application temperature: 10℃ or higher ・Thickness: 50μm (0.05mm) ・Adhesive strength: Medium

'About the Product' A transfer sheet (application sheet) is a sheet used to apply letters and designs cut from cutting sheets to objects while maintaining their original shape. It is also called a re-tack sheet. Because it is a transparent film type, it has excellent visibility and is an easy-to-use transfer sheet. Please use this if the [Strong Adhesive] from our printing workshop is too strong.

▼How to use [1] Cut out letters or designs onto the cutting sheet and peel off the parts you don't need.(Weeding) [2] After weeding, apply the transfer sheet (application sheet) to the cutting sheet (sticker) where only the necessary parts remain. [3] The cut-out letter sticker is complete. Purchase cutting sheets here

▼About the application process [1] Wash the surface to which you will apply the sheet with a neutral detergent to remove dirt, dust, and oil thoroughly. Then dry it well. [2] Carefully peel off the backing paper and apply the sticker using a squeegee or similar tool. [3] Once it is applied to the end, press it firmly again. [4] Slowly peel off the transfer sheet while checking that it is firmly attached.