Beginner TAGATORON Carbon Slide Gimmick Assembly Kit with Instruction Manual Front AT Slide Damper [Gimmick Series] (1. (with Thrust))

✅The flexible "AT bumper" base has been tapered (approximately 4.5 degrees) and now features a built-in thrust angle! 13/19mm rollers can be attached. ✅【With Thrust】Lane Change (LC) Strategy: The tapered design pre-sets the rollers in a downthrust (downward) position. This prevents the car from going off course at LCs due to loss of thrust and firmly grips the course wall. ✅【Slide Damper Function】Controls posture during jumps: Prevents the front end from "bouncing off the wall and turning too far inward" due to impact when entering a corner. Allows for a "straight" entry into the jump ramp and stabilizes the aerial posture. ✅【AT Function】Improved Course Recovery Rate: Even if the machine tilts upon landing from a jump, the bumper itself moves flexibly. Even if it hits a wall, the deflection effect will allow it to return to the course. ✅ Compatible with MS/MA/AR/FM-A chassis (bumper cutting of the chassis is required before installation on each chassis). ⚠️This product is an assembly kit. Therefore, it will be delivered in an unassembled state. Additionally, screws are required separately to attach it to the chassis. ⚠️This product is not manufactured by Tamiya Corporation. It is designed as an introductory tool for parts modification and for enjoying the gimmick in casual races and other events. It cannot be in official Mini 4WD competitions or races based on the rules of sanctioned competitions. ✅The flexible "AT bumper" base has been tapered (approximately 4.5 degrees) and now features a built-in thrust angle! 13/19mm rollers can be attached. ✅【With Thrust】Lane Change (LC) Strategy: The tapered design pre-sets the rollers in a downthrust (downward) position. This prevents the car from going off course at LCs due to loss of thrust and firmly grips the course wall. ✅【Slide Damper Function】Controls posture during jumps: Prevents the front end from "bouncing off the wall and turning too far inward" due to impact when entering a corner. Allows for a "straight" entry into the jump ramp and stabilizes the aerial posture. ✅【AT Function】Improved Course Recovery Rate: Even if the machine tilts upon landing from a jump, the bumper itself moves flexibly. Even if it hits a wall, the deflection effect will allow it to return to the course. ✅ Compatible with MS/MA/AR/FM-A chassis (bumper cutting of the chassis is required before installation on each chassis). ⚠️This product is an assembly kit. Therefore, it will be delivered in an unassembled state. Additionally, screws are required separately to attach it to the chassis. ⚠️This product is not manufactured by Tamiya Corporation. It is designed as an introductory tool for parts modification and for enjoying the gimmick in casual races and other events. It cannot be in official Mini 4WD competitions or races based on the rules of sanctioned competitions.