FIXFY 3in1 - Set of hose with pressure gauge + adapter + 2 x R1234YF refrigerant substitute with oil and sealant - for cars manufactured after 2017 - do-it-yourself air conditioning refilling
FIXFY 3in1 is a modern kit for do-it-yourself air conditioning servicing, which allows you to quickly and conveniently refill the refrigerant in your car. Designed for cars with R1234YF refrigerant, manufactured after 2017, it allows you to easily and effectively recharge the air conditioning without having to visit a workshop.
Thanks to the large capacity 500 ml you can be sure that it will be enough for the entire system - no surprises during use.
Why is FIXFY 3in1 the best choice?
❄️ Full independence - Thanks to FIXFY 3in1, you can recharge the air conditioning yourself, saving time and money at the service center.
❄️ Easy to use – The kit includes a hose with a pressure gauge, which facilitates precise dosing of the refrigerant and allows you to control the pressure in the system.
❄️ Compatibility – Designed for all vehicles with an air conditioning system based on the R1234YF refrigerant, used in cars manufactured after 2017.
❄️ Oil included – The product contains lubricating oil that ensures the efficiency of the air conditioning system and extends the life of the compressor.
❄️ No service visit – You can top up your air conditioning anywhere – in the parking lot, in front of your house or on the go.
What does FIXFY 3in1 contain?
Oil – Lubricates the air conditioning system, ensuring its proper operation and extending the life of the compressor.
Refrigerant gas – Replenishes the missing refrigerant, restoring full air conditioning efficiency.
What will you find in the kit?
✅ TWO FIXFY 3in1 CANS in a 500ml package containing 290g of refrigerant, which is equivalent to 920g of traditional refrigerant! This allows you to easily and effectively refill your air conditioning, even if you are far from a workshop.
✅ Hose with pressure gauge – Enables easy and precise refilling of the air conditioning and control of the pressure in the system.
✅ Adapter – Necessary for the efficient refilling process, ensures correct connection of the kit to the system.
Ready-to-use kit – No additional tools or a visit to a mechanic required – just connect and top up the system.
How to use FIXFY 3in1?
1. In the hose in the valve with the needle, retract the needle as far as possible (by turning the knob counterclockwise).
2. Connect the hose with the pressure gauge to the can.
3. Start the car's engine and air conditioning (AC - closed loop mode, maximum power, lowest temperature).
4. Connect the hose with the pressure gauge to the LP low pressure valve (Caution! Remember the adapter!), screwing it into the vehicle first, and position the can with the valve down.
5. Measure the pressure in the system.
6. Turn the knob to the right, the needle will move the check valve, which allows gas flow.
7. Stop charging when the needle on the pressure gauge is in the green area, i.e. between 25 and 40 PSI.
8. Disconnect the hose from the car's system and screw the nut onto the vehicle's low pressure hose.
9. Leave the car with the engine running and the air conditioning settings as in step 3 for another few minutes.
10. After approximately two weeks, repeat point no. 5, i.e. check the pressure in the system, and then repeat the above-mentioned steps if necessary.
FIXFY 3in1 – a fast, convenient and effective solution for air conditioning!
Thanks to FIXFY 3in1, you can take care of your air conditioning anywhere, anytime, without having to make an appointment at a workshop.