FIXFY 2in1 500ml Air Conditioning Refill Kit - LARGE CAN + Hose + R1234yf Adapter

FIXFY 2in1 - Set of hose with pressure gauge + adapter + R1234YF refrigerant replacement - for cars manufactured after 2017 - do-it-yourself air conditioning refilling

FIXFY 2in1 is a modern kit for do-it-yourself air conditioning servicing, which allows you to quickly and conveniently refill the refrigerant in your car. Designed for cars with R1234YF refrigerant, manufactured after 2017, it allows you to easily and effectively recharge the air conditioning without having to visit a workshop.

Thanks to the large capacity 500 ml you can be sure that it will be enough for the entire system - no surprises during use.

Why is FIXFY 2in1 the best choice?

❄️ Full independence - Thanks to FIXFY 2in1 you can recharge the air conditioning yourself, saving time and money at the service center.

❄️ Easy to use – The kit includes a hose with a pressure gauge, which facilitates precise dosing of the refrigerant and allows you to control the pressure in the system.

❄️ Compatibility – Designed for all vehicles with an air conditioning system based on the R1234YF refrigerant, used in cars manufactured after 2017.

❄️ Oil included – The product contains lubricating oil that ensures the efficiency of the air conditioning system and extends the life of the compressor.

❄️ Without a visit to the service center - You can top up the air conditioning anywhere - in the parking lot, in front of the house or on the go.

What will you find in the set?

✅ FIXFY 2in1 in a 500ml package containing 290g of refrigerant, which is equivalent to as much as 920g of traditional refrigerant! This allows you to top up the air conditioning easily and effectively, even if you are far from a workshop.

✅ Hose with pressure gauge – Enables easy and precise air conditioning charging and system pressure control.

✅ Adapter – Necessary for the efficient air conditioning charging process, ensures correct connection of the kit to the system.

Ready-to-use kit – No additional tools or a visit to a mechanic required – just connect and refill the system.

How to use FIXFY 2in1?

1. In the hose in the needle valve, retract the needle as far as possible (by turning the knob counterclockwise).

2. Connect the hose with the pressure gauge to the can.

3. Start the car's engine and the air conditioning (AC - closed circuit mode, maximum power, lowest temperature).

4. Connect the hose with the pressure gauge to the low pressure LP valve (Caution! Remember the adapter!), screwing it in the vehicle first, and position the can with the valve down.

5. Measure the pressure in the system.

6. Turn the knob clockwise, the needle will move the check valve, which allows gas flow.

7. Stop charging when the needle on the pressure gauge is in the green area, i.e. between 25 and 40 PSI.

8. Disconnect the hose from the car's system and screw the nut onto the low pressure hose in the vehicle.

9. Leave the car with the engine running and the air conditioning settings as in point no. 3 for another few minutes.

10. After approximately two weeks, repeat point no. 5, i.e. check the pressure in the system, and repeat the above if necessary. steps.

FIXFY 2in1 – a fast, convenient and effective solution for air conditioning!

Thanks to FIXFY 2in1, you can take care of your air conditioning anywhere, anytime, without having to make an appointment at a workshop.