SM-08160 driving pins (100)

Quick mounting plugs

8x160 mm 100 pcs.

It consists of a polyethylene sleeve and a screw with a conical head made of galvanized steel.

It is intended for non-structural multi-point fastenings of statically loaded building elements.

The most important parameters

• Model: SM-08160

• Plug size: 8.0x160 mm

• Screw size:4.9x165 mm

• Maximum usable length:120 mm

• Packaging: 100 pcs

• Socket: PZ-2

• Plug material: polypropylene

• Screw material: galvanized steel

Original product of the renowned company KLIMAS Wkręt-Met ®

Features and benefits

1. Increased head diameter with PZ socket

Provides significantly better pressure on mounted elements.

2. Conical screw head

It is more massive and has a significant thickening under its base.

3. Optimally designed expansion zone

Guarantees perfect expansion in contact with the ground.

4. Quick and easy push-through installation

Reduces installation time.

Substrates and application examples

B. Solid ceramic brick

C. Hollow silicate brick

D. Elements on lightweight aggregate

E. Solid silicate brick

1. Installation of skirting boards

2. Installation of lightweight hanging elements

3. Installation of wall profiles in coffered ceilings

4. Installation of wall profiles in coffered ceilings

These are only example applications.

• [ dk ] plug diameter: Ø 8.0 mm

• [ Lk ] plug length: 160 mm

• [ dw ] screw diameter: Ø 4.9 mm

• [ Lw ] screw length: 165 mm

• [ tfix ] max. usable length:120 mm

• socket: PZ-2

• number of pcs. in the package: 100

• Plug material: polypropylene

• Screw material: galvanized steel

• Mounting type: Through-through installation

• Substrate: Concrete, solid ceramic brick, hollow silicate brick, elements on lightweight aggregate, solid silicate brick

• European Certificate ETA-19/0156 - a guarantee of the highest quality,

• National Technical Assessment - ITB-KOT-2018/0528 edition 2

The plugs we offer are characterized by the highest quality and can be safely used in construction. We make every effort to ensure that the products delivered to our contractors are safe and adapted to specific tasks.

• Before installation, identify the substrate in which the fastener will be installed and compare the loads that the fastener will transfer with the load-bearing capacities specified in the Safety Data Sheet or in the European Technical Assessment.

• The appropriate length of the fastener should be selected so that the expansion zone is located in the wall construction material.

• The drilling method is supervised (holes in perforated masonry and aerated concrete substrates should be drilled with a rotary drill without impact).

• Diameter The diameter of the drilled holes should be consistent with the diameter of the fasteners used.

• Holes in solid substrates should be approximately 10 mm deeper than the fastener embedment depth.

• Holes in solid materials should be cleaned of drill cuttings by using a reciprocating drill motion at reduced speed.

• Next, a plastic sleeve is inserted into the hole and the screw is driven in until it penetrates the sleeve.

KLIMAS screws - the most common choice of professionals

*the measuring tape is not part of the auction (it is only used for better presentation of the screws)