Pins for driving in with wheels SMK-06080 (100)

Quick mounting plugs with collar

6x80 mm 100 pcs.

They consist of a polyethylene sleeve and a screw with a countersunk head made of galvanized steel. In the SMK model, the sleeve has a collar that ensures optimal pressure of the fastened elements.

It is designed for non-structural multi-point fastenings of statically loaded building elements.

Plugs with collar are recommended for mounting steel elements and wherever a larger pressure surface is required.

The most important parameters

• Model: SMK-06080

• Plug size: 6.0x80 mm

• Screw size:3.9x85 mm

• Maximum usable length:52 mm

• Packaging: 100 pcs

• Socket: PZ-2

• Plug material: polypropylene

• Screw material: galvanized steel

Original product of the renowned company KLIMAS Wkręt-Met ®

Features and benefits

1. Increased head diameter with PZ socket

Provides significantly better pressure on mounted elements.

2. Conical screw head

It is more massive and has a significant thickening under its base, affecting the flush with the surface of the fastened element.

3. Optimally designed expansion zone

Guarantees perfect expansion in contact with the ground.

4. Quick and easy push-through installation

Reduces installation time.

Substrates and application examples

B. Solid ceramic brick

C. Hollow silicate brick

D. Elements on lightweight aggregate

E. Solid silicate brick

1. Installation of profiles in suspended ceiling systems

2. Installation of profiles using connectors

3. Installation of plasterboard wall profiles

4. Installation of wooden partition wall structures

These are only example applications.

• [ dk ] pin diameter: Ø 6.0 mm

• [ Lk ] pin length: 80 mm

• [ dw ] diameter Screw: Ø 3.9 mm

• [ Lw ] Screw length: 85mm

• [ tfix ] Max. usable length: 52 mm

• Socket: PZ-2

• Number of pieces in the package: 100

• Dowel material: polypropylene

• Screw material: galvanized steel

• Mounting type: Through-through installation

• Substrate: Concrete, solid ceramic brick, hollow silicate brick, elements on lightweight aggregate, solid silicate brick

• European Certificate ETA-19/0156 - a guarantee of the highest quality,

• National Technical Assessment - ITB-KOT-2018/0528 edition 2

The plugs we offer are characterized by the highest quality and can be safely used in construction. We make every effort to ensure that the products delivered to our contractors are safe and adapted to specific tasks.

• Before installation, identify the substrate in which the fastener will be installed and compare the loads that the fastener will transfer with the load-bearing capacities specified in the Safety Data Sheet or in the European Technical Assessment.

• The appropriate length of the fastener should be selected so that the expansion zone was in the wall's structural material.

• The drilling method is monitored (holes in perforated masonry and aerated concrete substrates should be drilled with a rotary drill without impact).

• The diameter of the drilled holes should match the diameter of the fasteners used.

• Holes in solid substrates should be approximately 10 mm deeper than the fastener's anchorage depth.

• Holes in solid materials should be cleaned of drill cuttings by using a reciprocating drill motion at reduced speed.

• Then a plastic sleeve is inserted into the hole and the screw is driven in until it penetrates the sleeve.

KLIMAS screws - the most common choice of professionals

*the tape measure is not part of the auction (it is only used for better presentation of the screws)