Decibel Meter - Wintact WT1357 Sound Level Meter
Sound Level Meter
The digital sound level meter has been designed to meet the safety requirements for measurements in engineering, medicine, and industry. It is suitable for measuring sound levels in various environments such as factories, offices, street traffic, workstations, at home, but also for checking the sound quality of systems.
audio.
1. The device meets the requirements of IEC651 TYPE 2 and ANSI S1.4 TYPE 2 standards.
2. Modern, compact and portable.
3. Accuracy up to ± 1.5 dB.
4. Measuring range: 30 dBA-130 dBA.
5. MAX Hold - function of freezing the maximum measured value.
6. Equipped with type A and C correction filters.
7. Two measurement modes: fast and slow.
8. Allows you to change the measurement limits.
9. AC and DC output for frequency level analysis of the recorder, FFT analyzer, graphic recorder, etc.
Filter A corresponds to the frequency sensitivity of the human ear. It is used to measure the ambient noise level.
The C filter with a flat characteristic is used to measure the level of noise generated by mechanical devices.
The device has a Fast Mode measurement function for regular measurements. and in Slow Mode for measuring the average noise level.
POSSIBILITY OF MOUNTING ON A TRIPOD OR MONOPOD
• Device dimensions: 256 x 70 x 35mm
• Weight:276g (with batteries)
• Measurement range:30~80, 50~100, 60~110, 80~130, 30~130dB
• Accuracy:±1.5 dB
• Level measurement:30~130dBA, 35~130dBC
• Linearity/Dynamic range:50dB/100dB
• Operating frequency:31.5Hz~8KHz
• Resolution Measurement: 0.1 dB
• Equalization Filters: A/C
• Measurement Rate: 2 per second
• Overrange Indicator: OVER/UNDER
• AC Output: 0.707 Vrms at approximately 600 ohms
• DC Output: 10mV/dB at approximately 100 ohms
• Microphone: 1/2 inch electret condenser
• Operating Conditions: Temperature: 0 ~ 40 ° C, Humidity: 10 ~ 80% RH
• Storage conditions:Temperature: -10 ~ 60 ° C, Humidity: 10 ~ 70% RH
• Working time:30h (alkaline batteries)
• Power supply:4*1.5V AA alkaline batteries or DC 6V 100mA power supply
DESCRIPTION OF HOUSING ELEMENTS
1. Electret condenser microphone.
2. LCD display.
3. On/off button.
4. Level range switch:
• 30dB~80dB;50dB~100dB;60dB~110dB; 80dB~130dB; 30~130dB.
5. Maximum hold button.
6. Filter selection switch:
• A: Filter A for general sound level measurement.
• C: Filter C for checking low-frequency noise.
7. Measurement speed switch:
• FAST: for general measurement,
• SLOW: for checking the average level of noise fluctuations.
8. AC output: 0.707 Vrms into approximately 600 Ω.
9. DC output: 10mV/dB into approximately 100 Ω.
10. Calibration switch.
11. DC 6V external power supply connector.
12. Screw for mounting on a tripod.
13. Windshield - sponge that captures noise generated by air movement.
DESCRIPTION OF ELEMENTS DISPLAY
• 1. Level range.
• 2. Under range.
• 3. Low battery indicator.
• 4. Maximum reading hold.
• 5. Measured value.
• 6. Unit of measurement.
• 7. A/C filter.
• 8. Graph chart.
• 9. Over range.
• 10. Slow measurement mode.
• 11. Fast measurement mode.
• Sound meter
• Noise absorbing sponge
• Power supply cable
• 4 x 1.5V batteries AA
• A handy suitcase
• User manual in Polish.
About the BENETECH brand
BENETECHis a manufacturer of advanced measurement and control equipment. A specialized supplier of professional, digital measuring tools and other electronic devices.
BENETECH POLANDis an authorized and direct distributor of this brand in Poland and Europe.
The brand's catalog includes:
• pyrometers and thermal imaging cameras,
• anemometers (wind gauges),
• humidity meters and hygrometers,
• gas and air quality detectors and meters,
• sonometers (decibel meters) and lux meters (light meters),
• laser rangefinders and tachometers,
• thermometers and manometers,
• thickness and vibration meters (vibrometers),
• tools for electricians and cable detectors,
• electromagnetic radiation meters,
• home electronics devices and industrial.
At the customer's request, we attach a calibration report from the manufacturer translated into English. We receive the document in electronic form a few days later. To avoid delays in order fulfillment, we send the calibration report within approximately 7 business days to the email address provided in the order or assigned to your account.
The manufacturer's calibration report is a free, optional document and is therefore not included in this offer.
The device has a mounting hole for tripod: 1/4" thread (fits most tripods and monopods available on the market).