5-Section Collector with Filter and Compressor Pe 25, Rain Bird

Rain Bird HV Collector 5 Sections with Filter and Compressor Connection PE 25

Irrigation Collector for 5 Sections - A Ready Solution for Your Garden!

Do you want to take care of the beautiful appearance of your garden, but you lack time for regular watering? Our complete 5-section irrigation collector is the perfect solution for you! You can easily install it in the solenoid valve box, and thanks to the high-quality components, you will ensure effective irrigation of every part of your garden.

• ☝️Rain Bird 100-HV Solenoid Valves: Five Rain Bird 100-HV solenoid valves will ensure reliable operation and even irrigation of every section of your garden.

• ☝️Swivel Collector Tees: Thanks to five swivel collector tees, the assembly of the set will be easy and hassle-free, and the connections will be solid and durable.

• ☝️Swivel Collector Elbows: Two swivel collector elbows will allow for flexible adjustment of the collector to the terrain conditions, ensuring optimal irrigation.

• ☝️Watermil 1 Filter inch: The Watermil 1 inch filter effectively purifies water from impurities, protecting the solenoid valves from damage and ensuring long-term system performance.

• ☝️Irrigation Drain Valve: The irrigation drain valve will make it easier to purge the system of stagnant water before winter arrives, ensuring its long-term performance.

• ☝️25-1 Connectors: Six connectors will ensure easy and trouble-free connection to 25 mm diameter PE pipe.

Thanks to our irrigation kit, your garden will always be beautiful and well-cared for, regardless of the weather conditions! Check out our offer now!

DIY ASSEMBLY KIT

Assembly of the entire collector does not require the use of any tools!! All you need is your own strength :)

⚡ The manifold should be assembled according to the diagram in the photo above.

⚡Threaded connections between the solenoid valves and output connectors, as well as the solenoid valves and manifold tees, should be protected with Teflon, i.e., wrap them with the included Teflon tape, making about 16 wraps around each threaded connector.

⚡The compressor connection is already Teflon-coated by us!! Just tighten it all the way.

⚡We will give you the Teflon tape necessary to protect the manifold against possible leaks for FREE!!

ATTENTION!! Collector connectors (tees and elbows) used in the collectors are always from the same company (Tavlit, Irritec or Elysee - depending on availability)

Each collector will consist of tees and elbows from the same company!!