4-Section Collector with Filter and Compressor Pe 20, Rain Bird

Rain Bird HV Collector Set 4 sections with filter and RainBird PE20 compressor

Irrigation Collector for 4 Sections with Filter and Drain Valve

Are you looking for a solution to irrigate your garden or plot? Our ready-made collector will provide you with easy installation and effective irrigation in 4 sections, perfect for your needs!

• ☀️Rain Bird 100-HV Solenoid Valves: 4 durable Rain Bird 100-HV solenoid valves ensure reliable operation and uniform irrigation of every section of your garden.

• ☀️Swivel Collector Tees: 4 swivel collector tees facilitate installation and provide a solid connection between the elements of the irrigation system.

• ☀️Swivel Collector Elbows: 2 swivel collector elbows allow for flexible adaptation of the collector to the terrain conditions.

• ☀️Watermil 1 inch Filter: The Watermil 1 inch filter effectively purifies water from impurities, protecting the solenoid valves from damage and ensuring long-term system efficiency.

• ☀️Irrigation Drain Valve: The irrigation drain valve makes it easy to purge the system of stagnant water before winter arrives, ensuring its long-term operation.

• ☀️20-1 Connectors: 5 20-1 connectors enable easy and trouble-free connection of the collector to 20 mm diameter PE pipe.

The assembly of the entire collector does not require the use of any tools!! All you need is your own strength :)

⚡ The manifold should be assembled according to the diagram in the photo above.

⚡Threaded connections between the solenoid valves and output connectors, as well as the solenoid valves and manifold tees, should be protected with Teflon, i.e., wrap them with the included Teflon tape, making about 16 wraps around each threaded connector.

⚡The compressor connection is already Teflon-coated by us!! Just tighten it all the way.

⚡We will give you the Teflon tape necessary to protect the manifold against possible leaks for FREE!!

ATTENTION!! Collector connectors (tees and elbows) used in the collectors are always from the same company (Tavlit, Irritec or Elysee - depending on availability)

Each collector will consist of tees and elbows from the same company!!