Specialchem Impregnation for absorbent ceramics, bricks, clinker, roof tiles 5L

Specialchem Impregnator for Absorbent Ceramics, Bricks, Clinker, and Roof Tiles is the ideal solution to protect your buildings from harmful factors. This nanotechnology-based, water-based product is a colorless impregnator that penetrates up to 8 mm into the material, effectively protecting it from dirt, rain, and other harmful factors. The impregnator is designed for unglazed bricks, unglazed clinker, unglazed ceramic roof tiles, hand-formed bricks, flowerpots, and other ceramic products made of absorbent (unglazed) ceramics. Specialchem Impregnator is ideal for protecting building facades, fences, cut brick tiles, brick walls, floors, roofs, basements, and interior walls. Specialchem Impregnator gently hardens the material's surface, imparting hydrophobic and STAY-CLEAN properties, effectively protecting the surface from dirt, erosion, and stains for years to come. This solution is suitable for both indoor and outdoor use. Using Specialchem Impregnator for absorbent ceramics, bricks, clinker, and roof tiles not only protects against harmful factors but also preserves the aesthetics and cleanliness of the material for a long time. Thanks to this product, you don't have to worry about daily surface maintenance – a single application is enough. If you want to care for your buildings and protect them from harmful factors, Specialchem Impregnator for absorbent ceramics, bricks, clinker, and roof tiles is the solution for you. The product penetrates deep into the material, protecting it from dirt and other harmful factors, offering reliable protection for years. Product use: Unglazed bricks and hand-formed bricks Unglazed ceramic roof tiles Absorbent clinker – unglazed Unglazed brick and clinker tiles Flowerpots and other unglazed ceramic products Coverage: approximately 100 to 150 ml per m² 1 liter: Covers 7 to 10 m² 5 liters: Covers 35 to 50 m² 10 liters: Covers 70 to 100 m² Application method: Garden sprayer for large surfaces Roller or brush for details or small areas Durability: approximately 5 years Instructions for use Specialchem Impregnator for absorbent ceramics, bricks, clinker, roof tiles Caution: Do not apply to a very hot surface. Ready to use: The product does not require dilution with water or other substances. Safety: The use of protective glasses and gloves is recommended. Planning the impregnation: Ensure there will be no rain for at least 3 hours after impregnation. Always test in an inconspicuous area to check for the desired effect! Protection: Protect plants and all other surfaces not to be impregnated, especially glass and steel, with plastic wrap. If stains occur, immediately clean these surfaces with a wet cloth or rinse with water. Surface preparation: The surface to be impregnated must be clean and dry. Apply the impregnation: Apply an appropriate amount of the product to the surface, avoiding excess to prevent streaking. If you apply too much, spread the excess with a brush or cloth. Allow to dry. Coatings: Apply one or two coats, but only using the "wet-on-wet" technique. Tools should be rinsed under running water. Safety and storage: Protect the product from frost. Follow basic health and safety rules. Store in a tightly closed container, away from children and animals. Avoid contact with skin and eyes. Before use, read the product's technical data sheet. Store at 0-35°C. Specialchem Impregnator for Absorbent Ceramics, Bricks, Clinker, and Roof Tiles. Why impregnate surfaces: Specialchem Impregnator for Absorbent Ceramics, Bricks, Clinker, and Roof Tiles: 1. Moisture Protection: Bricks, especially when not properly protected, tend to absorb moisture, which can lead to the formation of fungi, mold, and the growth of moss and algae. Wet bricks become heat conductors, reducing the effectiveness of thermal insulation and weakening the structure. Impregnating the brick surface with a hydrophobic impregnator creates a barrier that effectively repels water and prevents its penetration into the structure, which is particularly effective in the event of rain, snow, and other atmospheric conditions. 2. Protection against Contamination: Surface impregnation provides protection against various contaminants. Brick is susceptible to stains from various sources, such as plants, rain with dissolved soot, chemicals, and smog. Hydrophobic impregnation impedes the penetration of these substances, making it easier to keep the brick clean and preventing damage and discoloration. 3. Improving durability. Impregnating the brick surface significantly improves its durability. It acts as an additional protective layer, protecting the brick from the harmful effects of external factors such as frost, UV radiation, airborne particle deposition, and pollution. This increases the brick's resistance to deterioration, cracking, peeling, and erosion, extending its lifespan. 4. Aesthetics. Impregnated brick surfaces gain in attractiveness. The hydrophobic coating gives the brick a more uniform, pure color and depth, protecting it from darkening caused by microflora. Impregnated bricks look fresh and aesthetically pleasing for many years, contributing to the overall visual appeal of the building. The use of Specialchem Impregnation for Absorbent Ceramics, Bricks, Clinker and Roof Tiles brings tangible benefits, combining effective protection with the aesthetic appearance of brick surfaces.