11mini Automatic Digital Multimeter Battery-powered, automatic digital multimeter with true RMS measurement and a 4000-count LCD display. A high-quality device made of high-quality materials, it is an indispensable element of any service center, automotive workshop, and a useful meter for every home. Additionally, the multimeter is equipped with an LED flashlight, allowing you to use the device even in low light or in the dark.
Power button: Press this button for more than 2 seconds to turn the product on or off.The product will automatically turn off after 15 minutes of inactivity, and the built-in beep will sound 5 times 1 minute before it automatically turns off. To cancel automatic shutdown, press NCV before turning the product on; after the 5 beeps, it will cancel automatic shutdown.
Press this button for more than 2 seconds to turn the product on or off.
The product will automatically turn off after 15 minutes of inactivity, and the built-in beep will sound 5 times 1 minute before it automatically turns off. To cancel automatic shutdown, press NCV before turning the product on; after the 5 beeps, it will cancel automatic shutdown. Backlight Key: Press once to freeze the current reading on the display;
Press for more than 2 seconds to turn on the flashlight backlight. And long press again to turn it off.
NCV Key: Press this button repeatedly to enter NCV testing mode. In this mode, always press the button. The NCV function cannot be used after inserting wires into the current terminal. NCV Test: 1. Press the NCV button repeatedly to enter NCV mode.
2. Hold the product and move it; the built-in beeper will sound when the internal sensor detects nearby AC voltage. The higher the voltage, the faster the beeper sounds and the central LED flashes.
Current Test: 1. Connect the red lead to the clamp and the black lead to the COM terminal. The current measurement will be automatically adjusted after the leads are inserted.2. Touch the probe to the appropriate test points on the circuit to measure the current.
3. Read the measured current on the display.4. When applying a current above 2 amps, the testing time should be less than 3 seconds.
5. When the probes are in the current terminal but there is no operation, this product will alarm every 4 seconds to remind you that you are in the current mode. Specifications: DC VOLTAGE (V): 4.000 V 0.001 V / 40.00 V 0.01 V / 400.0 V 0.1 V / 600 VAC VOLTAGE (V): 4.000 V 0.001 V / 40.00 V 0.01 V / 400.0 V 0.1 V / 600 VAC mA: 999.9 mA 0.1 mAAC A: 9.999 A 0.001 A.DC mA 999.9mA 0.1mADC A: 9.999 A 0.001 AResistance: 4.000kΩ 0.001kΩ / 40.00kΩ 0.01kΩ / 400.0kΩ 0.1kΩ / 4.000MΩ 0.001MΩ / 40.00MΩ 0.01MΩContinuity: YesNCV: YesFrequency response in AC modes: 40 Hz - 1 kHzPowered by 2 AAA batteries (included) Included: 11-bit digital multimeter2 x test probe leadsUser manual in English
Товар из Польши
Возврат по недоставке
