----------------------------------------------------------------------
【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
----------------------------------------------------------------------
[2 Pcs Hall Effect Joysticks for PS4] - The Hall Thumbsticks are replacements for DualShock PS4 Controller (DS4). Built-in electromagnetic hall stick sensor, the control sticks achieve higher sensitivity and precision. Say goodbye to drifting as wear from traditional carbon film resistors is eliminated. Made of durable materials with superior locking structure for smoother movement and longer lifespan.
[2x Extra Calibration PCB] – Small PCBs are designed to be stacked on the back of the main board. Movement signals are input to the high-speed MCU. Calibrated signals are output to the controller main board. Connect the controller to PC with a USB cable. You can fine-tune the center and adjust the curves via web link. Accurate centering without drift is essential for FPS aiming.
[Desoldering Tools Included] - The copper heating plate melts all the solder joints at the same time with the soldering iron. Comes with a solder wick, a hole cleaner and a simple PCB holder. The most difficult task is to remove the old problem bar, as it has 14 prongs. It may not be suitable for beginners, but we added these helpers to the kit.
[Compatibility and Precautions] – 1. Please check the compatible controller picture carefully. 2. The soldering iron should be 60W or more. And you need serious soldering skills and devices to solder the old stick from the PCB. 3. Please follow the steps listed in the installation guide of this kit seriously. This is novel and tricky. 4. 🔺Note: When calibrating, please wait at least 3 seconds after unplugging the USB cable, then plug it back in and power cycle the DS4 controller.
[What's in the Box Model: HL-PS4] – 2 x Hall Joystick, 2 x Calibration PCB, 1 x Heating Plate, 1 x Solder Wire, 1 x Hall Cleaning Tube. (🔺Disassembly screwdriver tool, USB wired/wireless controller, other soldering tools and materials are required but not included.)
Model: HL-PS4
Hall Effect Joysticks Replacement for PlayStation 4 Wireless Controller
Calibration PCB with MCU for the finest Centering and Rocking Curve
A Copper Heating Plate and Solder Wick help a lot for the Desoldering
Reminders:
1. 🔺Works with DualShock PS4 controller (DS4) with main board JDM-001, 011, 020, 030, 040, 050 and 055
2. 🔺When calibrating, wait at least 3 seconds after unplugged the USB cable before you plug it in again to re-power on the DS4 controller
3. Make sure your controller is authentic and genuine
4. Not fully tested with some customized PS4 controllers based on DS4 like SCUF and other 3rd. The added back button board might be removed before settings
5. The operation takes serious soldering skill and devices. The soldering iron must be more than 60W
6. Seriously follow the steps we presented on the guide for this kit is novel and tricky
7. Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however NOT included
What's in the box:
2x Hall Joysticks
2x Calibration PCB
1x Heating Plate
1x Solder Wick
1x Hole Cleaning Tubes
