⚠️If a power adapter is included, please be sure to check that it is compatible with your country's power standards before use. The seller will not be held responsible for any damage caused by using an adapter that does not meet the standards.
The Fulltone Obsessive Compulsive Drive (OCD) is an overdrive/distortion circuit with an extremely open sound, and unlike other overdrives, it has a very wide dynamic range... meaning that with subtle differences in picking nuances, you can get a more natural and broader distortion with less compression than traditional diode-clipping overdrives.
The OCD achieves tube-like distortion through an unusual combination of overdriving a JFET op-amp and hard-clipping a pair of MOSFETs in the latter half of the circuit. Its high output volume allows for much harder drive than typical overdrive pedals.
It also operates on DC18V, resulting in a significant improvement in dynamic range and clarity.
V2 features "Enhanced Bypass," which buffers all dynamics by 0.3–0.06dB even with minimal gain, by setting both switching FETs to Class A and one FET for gain. This ensures consistent sound regardless of placement on your pedalboard, reducing the load on the pedal's hard clipping stage and improving sustain for both tonal and harmonic tones. Additionally, the Class A discrete 2N5457 JFET input section increases the input impedance to 1 megaohm (previously 330K), further improving dynamics. It also features an internal switch to select between the new "Enhanced Bypass" and "True-Bypass" functions.
■Control
·Volume: Adjusts the volume.
Drive: Turn clockwise for more distortion, or keep it below the 10 o'clock position for a cleaner sound or to boost the amp's input without changing the basic tone.
·Tone: Turning it counterclockwise makes the high-gain lead sound smoother (with the Drive knob set higher than 12 o'clock), while turning it clockwise increases the cut and decreases the compression.
·ON/OFF Footswitch: This is a switch to toggle between on and off.
■INPUT: 1/4” Mono standard phone input jack
■OUTPUT: 1/4” Mono standard phone output jack
■DC INPUT: Operates with a high-quality, regulated 9-18VDC center-negative power supply with a 2.1mm x 5.5mm plug.
■BATTERY: Operates on a 9-volt battery.
*When replacing the battery, unscrew the screws on the left and right sides of the casing, separate the upper and lower parts of the pedal, and then replace the battery.
Package includes: 1 x Guitar effects pedal