The TOON X DSP-T324 adds digital signal processing and amplification while retaining the factory head unit and speakers. Vehicle-specific presets are tuned in the corresponding vehicle, providing a starting point for its audio setup. Coupler connections require no wiring modifications and allow a return to the factory configuration.
Compatibility: Crown Crossover (2022-09~) with display audio (12.3 inch)
Confirm the vehicle, build date, connector and audio options before purchase.
Power supply: DC 12V (negative ground)
Operating voltage: 10V-15V
Maximum current consumption: 15A
Idle current: 0.35A (no signal)
Fuse: 250V, 15A, φ5.2×30mm (included with vehicle connection cable)
Remote terminal output for external amplifier: 12V
Remote output current: 0.1A
Frequency response (+0/-1dB): 20Hz-22kHz
S/N ratio: 105dB
Total harmonic distortion: 0.01%
Dimensions (W x D x H), mm: 170×103×45
Weight: 900g
Install in a well-ventilated location; under the passenger seat is recommended. Not compatible with vehicles that have a factory external amplifier. Reset the factory head unit's sound settings to OFF or flat before use.
The factory fader and independent front/rear audio modes are unavailable with TOON X. These independent modes play different audio to front and rear seats. A DSP-GS1 allows switching between factory audio, with independent modes available, and TOON X audio, with those modes unavailable.
Popping sounds may occur at power-on or power-off and are not a malfunction. In rare power-off cases, setting the startup timing switch to HIGH may reduce the noise.