Takenous Takemura Shokai COB LED Tape Light 24V Only Waterproof Cuttable with Double-Sided Tape for Trucks, Buses and Vessels (1m, Warm White)

Brand: Takenous Manufacturer: Takemura Shokai Model name: LED Tape Model number: TAKE-119 Product model number: TAKE-41 Color: Warm white Size: 1m Included accessories: None Quantity: 1

Light from a continuous line rather than individual points. A 24V-only COB LED tape light from Takemura Shokai, an LED maker for trucks. Decorate andon in your preferred color. Run a light line along the side bumper. Finish the chassis area to suit your own style. The COB design reduces the graininess of LEDs for a smooth surface emission, showing off your carefully built vehicle.

■ Smooth COB surface emission with reduced LED graininess The COB design reduces the dotted look typical of LEDs. Light that connects smoothly creates a clean, single line. Use it as a visible decoration showing the light source itself, or as indirect lighting that hides the source. Recommended for those who want a connected line of light rather than individual points.

■ Decoration for andon to chassis For decoration around andon, side bumpers, chassis, cargo bed and steps, and for indirect lighting inside vehicles and vessels. Attach along the body lines or inside the andon. Create the lighting effect you like based on the mounting location. *Confirm that the power source connected to trucks, buses, vessels or other vehicles is DC24V.

■ Cut to the required length for the mounting location Can be cut at the marked cut lines to adjust the length to fit the mounting location. 1m, 2m and 3m versions have wiring on one side. The 5m version has wiring on both sides. If the cut section has no wiring, separate wiring work is required. *After cutting or other processing, the product is not covered by the product warranty. Always check that all lights are on in the condition received before processing.

■ Double-sided tape for easy fixing during installation Double-sided tape is pre-applied to the back. Decide the mounting position, fix it in place, then connect the wiring to use it. Before attaching, thoroughly remove dirt, oil and moisture from the mounting surface. If adhesion is insufficient depending on the surface material or condition, replace the tape with a commercially available strong double-sided tape suitable for that location.

■ DC24V only, waterproof design The tape body is waterproof. However, cut sections and wiring connections require separate waterproofing. When installing or processing, always waterproof cut edges and connections to prevent moisture from entering.

■ Please check before purchase [Power supply] This product is DC24V only. It cannot be used with 12V power. Do not connect directly to AC100V power. Failures caused by using a 100V conversion adapter are not covered by the product warranty.

[Lighting check and warranty before processing] After cutting, attaching gibo terminals, or any other wiring processing, the product is not covered by the warranty. Always confirm before processing, in the condition received, that all LEDs light normally. If there is any abnormality, do not process it; contact us.

[Cutting and waterproofing] Always cut at the designated cut lines. Always waterproof cut sections and wiring connections.

[Power and wiring check] Confirm that the connected power source matches the product's rated voltage. Confirm that the capacity of the connected circuit, wiring and fuse suits the total current consumption of the electrical equipment used. If it does not light, turn off the power and check the wiring and connections.

[Installation outside the vehicle] Confirm that the light color, brightness, mounting position and lighting method comply with the safety standards.

brand: Takenous manufacturer: Takemura Shokai model: LED Tape package contents: None quantity: 1