Beatsonic Back Camera Wide Angle Type For Regular Cars BCAM7AW

• *Vehicles registered after October 1, 2021 cannot install or use the Chameleon Camera (applicable product number BCAM).

Product introduction

Notice regarding amendments to the Enforcement Regulations of the Road Transport Vehicle Act Partial amendments to the Road Transport Vehicle Act Enforcement Regulations have been enacted. The Chameleon camera (BCAM series) that is attached to the bolt part of the license plate falls under the bolt cover of the Road Transport Vehicle Act Enforcement Regulations, and transitional measures and new standards apply.

Vehicles registered by September 30, 2021 Vehicles registered before September 30, 2021 can be fitted with a Chameleon camera (target product number BCAM) and can continue to be used after October 1, 2021.

Vehicles registered after October 1, 2021 Vehicles registered after October 1, 2021 cannot install or use a chameleon camera (target product number BCAM).

OK for most cars. The Chameleon series uses the number plate mounting screw holes to attach the camera.Since the cable is passed through the screw, it can be installed on most cars.Recommended for those who have trouble finding a place to install it.

We have a reliable track record and are used by over 50,000 cars. A total of approximately 50,000 units shipped.Many customers choose this camera because it can be attached to a car without drilling a hole.

For regular cars only License plate mounted ultra-compact rear camera

Included items Camera body (cable length 2.3m) / Power supply video output cable (video cable length 5m, power cable length 1.5m) / Resin washer (thickness 1mm x 2) / M6 nut / Metal washer / Spring washer / φ5.1 drill / Instruction manual /

Precautions for BCAM installation Processing may be required on the vehicle side for installation. For example, when there is a metal plate directly behind the license plate mounting screw that prevents the connector from passing through.

Regarding safety standards for road transport vehicles Protrusion limitations Safety Standards for Road Transport Vehicles Article 18, Paragraph 1, Item 2 stipulates that the frame and body of a vehicle must be free of sharp protrusions.Specifically, the notification states that when a sphere with a diameter of 100 mm is gently pressed against the object, there must be no corners with a radius of less than 2.5 mm in the area that can come into contact with the sphere.Our BCAM series cameras are designed to comply with this regulation with proper installation. Registration number plate (license plate) There are no clear prohibitions on attaching it to registration number markers.Our opinion is that anything that differs from the background color of the registration number sign should not be installed, nor should it overlap the letters or numbers on the registration number sign.Our BCAM series cameras are designed so that the main body color is the same color as the registration number plate and does not cover the letters or numbers of the registration number plate when installed.

Features Number screw to camera. Since the number plate (vehicle registration number mark) fixing screw hole is used, most cars do not need drilling or other work and are easy to use.

Super small size. Since the camera body is ultra-compact, it can be installed without compromising the visibility of the license plate number.

Clear images even in the dark Adopting high-sensitivity CMOS, you can get clear and easy-to-see images even in dark places. Can be used from daylight to night, and responds quickly to changes in light level.

Wide angle/mirror image Horizontal: Adopts a wide-angle lens of approximately 140 degrees to ensure a wide viewing angle. The video output is a mirror image type, so you can view it in the same way as in a rearview mirror.

Drip-proof, waterproof structure. The back camera body has a drip-proof and waterproof structure.The long camera cable allows you to pull it into the car without getting wet.

Compatible with external protrusion regulations. Our back and front cameras comply with the external protrusion regulations effective March 31, 2017, so you can use them with confidence.

Ensuring visibility Chameleon series products are designed in accordance with safety standards.The number letters are visible even when viewed from a 30 degree angle.The camera body is also painted in the same color as the number, so it is not noticeable.

Precautions It cannot be installed depending on the shape of the number frame. Processing may be required for installation. Depending on the thickness of the license plate and the car model, the camera fixing screw part (19mm) may be too short to attach the fixing nut. If the connector part is too thick to pass through the vehicle's screw hole, use the included φ5.1 drill to increase the diameter of the vehicle's screw hole.If you force it through, the connector may be damaged. BCAM7W is for private registered vehicles, and BCAM7Y is for private light vehicles. Do not install on vehicles with license plates (registration number markers) of different colors. This product is only for 12V negative ground vehicles. It cannot be used in 24V cars or positive earth cars. For registered cars, the mounting screw on the left side of the license plate (registration number plate) has a seal.Never remove it. This product is installed using the screws on the right side. This product is a mirror image output type exclusively for rear camera.Switching is not possible. Video output is NTSC (RCA pin) 1Vpp (75Ω). It can be connected to a TV/NAVI with a compatible input, but please check the specifications of your TV/NAVI regarding reverse gear linkage. This product is intended to assist the driver's visibility. When driving, please be sure to check safety with your own eyes. Do not disassemble or modify this product.This will not be covered by the warranty. Please note that if this product is installed, connected, or used incorrectly, it may cause damage or damage to vehicle equipment, and our company cannot be held responsible for such damage. We do not provide any support for installing this product on illegally modified cars, poorly maintained cars, etc., or providing any warranty. Please note that we are not responsible for any accidents or malfunctions caused by using this product. Please note that we are not responsible for any damage to your vehicle (fading, dirt, etc.) caused by installing this product.

Specifications Power supply: DC12V negative ground Current consumption: 55±5 mA Image direction: Mirror image (for rear confirmation only) Guidelines: None Image sensor: 1/4 inch color CMOS image sensor Number of effective pixels: 640 (horizontal) x 480 (vertical) approximately 310,000 pixels Angle of view: Horizontal: approx. 140 degrees Vertical: approx. 105 degrees Synchronization method: internal synchronization S/N: 48dB or more Minimum illuminance: 1 lux Video output: NTSC (RCA pin) 1Vpp (75Ω) Operating temperature range: -10℃~50℃ Waterproof structure: IP67 External dimensions: 20(W)x23(H)x25.5(D)mm Weight: Approx. 25g (camera body)

Before purchasing, please check the vehicle model, engine model, drive system, year, grade, etc. with the vehicle inspection certificate and caution plate, and be sure to check the manufacturer's website to see if there are any errors in vehicle compatibility.

safety warning

*Please do not disassemble or modify this product.This will not be covered by the warranty. *Please note that incorrect installation, connection, or use of this product may cause damage or damage to vehicle equipment, and we are not responsible for such damage. *We do not provide any support for installation or warranty of this product on illegally modified cars, poorly maintained cars, etc. *Please note that we are not responsible for any accidents or malfunctions caused by using this product. *Please note that we are not responsible for any damage to your vehicle (fading, dirt, etc.) caused by installing this product.