Yupiteru Laser & Radar Detector YK-100A Standard 3.6 inch One

• A younger sibling standard carefully selected value model that has the same basic performance as the YK-2000A but is not compatible with wireless LAN. • By expanding the K-band reception range, we have realized the warning of portable radar Orbis "JMA-520" and "JMA-401".By changing the radar module and antenna, K-band detection performance has been improved by more than 50% compared to conventional products (compared to our conventional products). • Using the included SD card, you can update content data such as public enforcement information (additional radar portable Orbis deployment information for each prefecture).*Wireless LAN is not supported *To update Orbis data, you must separately join the ity club and select a plan. • DC12V cigarette plug cord model that is easy to install.Optional DC12V power supply direct connection cord (OP-11U), LCD protective film (OP-PF36R1), DC plug ➝ mini plug conversion connector (OP-8U), and OBDⅡ adapter (OBD12-MⅢ, OBD-HVTM) are also available. • Instruction manual is not included.You can download the user manual (PDF) on this page or from the manufacturer's website.

One body YK-100A with built-in GPS antenna In addition to the "MSSS" mobile Orbis, it also supports the radar portable Orbis "JMA-520" and "JMA-401".

[Improved K-band detection performance] K-band detection performance has been improved by more than 50% compared to conventional products by changing the radar module and antenna!(Comparison with our conventional product) [Alarm accuracy further improved] 《K-band alarm type automatic switching》 (patent pending) Warning types are automatically switched according to the deployment status of portable radar Orbis in each prefecture. [Alarm Priority] Maximize alerts in deployment areas [Identification Priority*] In undeployed areas, K-band identification is performed to reduce false alarms and provide warning. *Since radio wave strength is required for radio wave identification, the alarm distance may be shortened. 《K band identification function》 (patent pending) Identifies control radio waves and radio waves that have previously been the source of false alarms.Significantly reduces false alarms [Alarm contents] Laser light reception, GPS warning, radar wave (X band, K band) reception, wireless 14 band reception [Number of identification alarms] 86 targets identified / GPS data registration of over 174,000 cases / Control/inspection data of over 63,800 cases

◤Functions/Specifications ■External dimensions: 106(W) x 60(H) x 21(D)mm, body weight: Approx. 120g (including microSD card) ■Monitor type: Capacitive touch panel 3.6 inch LCD one body with built-in GPS antenna ■Reception method: GPS section: 32 channels/parallel reception method / Radar section: Sweep oscillator type double superheterodyne method ■Reception frequency: GPS section: 1.6GHz band / Radar section: X band/K band / UHF section: 336~470MHz band / VHF section: 154~163MHz band ■Positioning update time: minimum 0.5 seconds ■GPS positioning satellites: Up to 90 satellites can be received.32 GPS units / Quasi-Zenith Satellite “Michibiki” 3 units / GLONAS 24 units / SBAS 5 units / GALILEO 26 units in total ■Equipped with sensors: G (acceleration) sensor / gyro sensor / barometric pressure sensor / illuminance sensor ■Laser light reception: Dedicated high gain amplifier IC/Espheric lens ■Laser detection range: Horizontal approx. 60° 700,000 m2 Wide range detection ■OBD2 vehicle speed detection: *Requires OBDⅡ adapter (sold separately) ■Power supply voltage: DC12V (for negative ground vehicles only) ■Current consumption: (standby) 230mA or less, (maximum) 420mA or less ■Operating temperature range: -20℃ to +85℃ (UHF / VHF part: -10℃ to +60℃) ■Product warranty period: 3 years (excluding consumables)

◤Accessories ◆Dashboard mounting bracket x 1 ◆Suspended installation stay x 1 ◆Cigar plug cord (L-M type mini plug DC12V output) approximately 4m x 1 *Direct power cord (OP-11U) is also available as an option. ◆Adhesive sheet x 1 ◆Adhesive mat x 1 ◆Double-sided tape x 1 ◆microSD power supply × 1 *Already installed in this device ◆Warranty x 1

🔶Simple package & download version instruction manual model (instruction manual is not included with the product)

❖Options ◆Direct power cord OP-11U approximately 4m ◆LCD protective film OP-PF36R1 ◆DC plug ➝Mini plug conversion connector OP-8U *This is a connector that converts a DC plug to a mini plug so that you can use the existing wiring as is when replacing our DC plug type radar detector. ◆OBDⅡ adapter: OBD12-MⅢ for domestic compatible vehicles (approx. 4m), OBD-HVTM for Toyota hybrid (approx. 4m)