433mhz Wireless Control Rf Remote Light Switch 220v 110v 10a Relay Receiver Mini Round Button Wall Panel Switch For Led Lamp

Note:

The relay controller is RF Receivers ,the wall switch is RF only. Wall switch itself cannot control lights on off. It needs to work with rf receiver together.

Specification: Transmitter (Remote) : Operating frequency: 433MHz Power by 2 Pcs 3V CR2016 Battery (Battery included ) Material: PVC; Button: 2 buttons; Size: 60mm x 30mm; Operating voltage: 3V ; Operating Current: 12mA; Transmitting power: 10mw; Modulation mode: ASK (AM). Encoding type: Learning. Transfers distance: 20 50m

Controller (Receiver) : Input Power: AC90-250V 60HZ/50HZ Max current: 10 A RF Frequency: 433Mhz Working temperature:-30 +80 RF working mode: superheterodyne Receive sensitivity: >97dbm Transmitting distance: more than 50 m ( open space) Remote storage:20pcs Support remote type: Learning code 1527code Size: 47.4*42*22.8 (mm)

433MHZ wireless switch signals: How to get the signals Step 1: Press the learning button(on the Receiver) twice . Wait for 3 seconds; Step 2: Press one button on the remote control. Wait for 3 seconds. Succeed.

How to clear the signals: Only one step :Press the learning button(on the Receiver) 8 times.

Easy connect and multi control one;

The receiver is easy to install, Multi switches can control different receivers or one receivers strong signal and Long distance control;

Control the light in the room, even outside the room, The receiver can be remotely controlled up to 50 meters through a wireless switch and the signal can be controlled through the wall;

Wide range of application

Products can be used in homes, farms, factories, offices, laboratories, supermarkets, and so on.

Remote control Water pump / Fan / Lamp / LED light / bulb / ventilation device/ Exhaust system, Kettle, water heaters / Signal transmission / Electrical equipment /Factory Home Office Ventilation Pump LED Light.

How to get the signal:

Step 1: Press the learning button(on the Receiver) twice. Wait for 3 seconds;

Step 2: Press one button on the remote control or wall panel. Wait for 3 seconds. Succeed.

How to clear the signal:

Only one step: Press the learning button(on the Receiver) 8 times. Wait for 3 seconds;