MONSTER SPORT Heptagon Wheel Nut Type-2 M12 x P1.5 Set

• [Compatible models] Toyota (excluding 86), Daihatsu, Mazda, Honda, Mitsubishi • The material used is chrome vanadium steel, which does not easily loosen even at high temperatures, achieving both strength and compactness and light weight. • Recommended for vehicles with tight protrusion clearances such as compact cars and light vehicles. • Please be careful with OEM vehicles.Also, wheels with wheel nuts that have a flat or spherical contact surface cannot be installed. • Cannot be installed on genuine wheels etc. if the contact surface of the wheel nut is not tapered.

Heptagon design x high strength material. A premium wheel nut that is both small and lightweight and has an anti-theft effect. Although the short size is perfect for compact cars, the aluminum cap on the tip adds accent to the wheel.

■Anti-theft function The heptagonal design provides anti-theft functionality.

■Lightweight & high strength The material used is chrome vanadium steel, which does not easily loosen even at high temperatures, achieving both strength and compactness and light weight.

■Special aluminum cap Equipped with a machined aluminum cap with a color anodized finish on the tip, which is also removable.Adds an accent to the mounted wheel.

■Compact size The total length of the wheel nut has been reduced to 28mm (-4mm compared to conventional heptagon wheel nuts). Recommended for vehicles with tight protrusion clearances such as compact cars and light vehicles. A compact design that takes advantage of the heptagonal shape in the radial direction.It is also possible to match wheels that are tight around the nut.

■Brand logo The "MONSTER SPORT" logo is printed on each of the aluminum cap and nut body.

[Compatible models] Thread diameter: M12 Thread pitch: P=1.5 Main compatible manufacturers: Toyota (excluding 86), Daihatsu, Mazda, Honda, Mitsubishi, etc. *Please be careful about OEM vehicles.Also, wheels with wheel nuts that have a flat or spherical contact surface cannot be installed.Please see the website for a detailed list of compatibility.

Notes on compliance *The above is a guideline.Please be especially careful with OEM vehicles from other companies. *The tapered seat surface of this product is 60°. *It cannot be installed on genuine wheels etc. if the contact surface of the wheel nut is not tapered. *Not compatible with vehicles with wheel bolt specifications. *When the cap is attached, the effective screw length of this product is 20mm.Please confirm in advance that the vehicle hub bolt does not have insufficient threading allowance or bottoms out. *Please make sure that the nut fits inside the fender.Conditions vary depending on vehicle condition, individual differences, and wheel combinations, so be sure to check the actual vehicle. * Even if the nut fits inside the fender, if it protrudes from the outermost part of the wheel rim, you may be flagged depending on the severity (if it is determined to be a sharp protrusion). *If you do not use a wheel offset spacer on a vehicle equipped with long hub bolts, the hub bolt will bottom out and you will not be able to install the cap. *1 When the aluminum cap is attached, the effective thread length of this product is 20mm.Please make sure that there is enough threading allowance for the hub bolt before purchasing. ネジの掛かり代(10mm以上)が不足したり、ホイールナットが底付きした場合、装着できません。Please be sure to check the amount of hub bolt protrusion on the actual vehicle, as it varies depending on the wheel and hub bolt length to be installed. *2 For vehicles equipped with long hub bolts, it is necessary to adjust the thread length using a wheel offset spacer, etc.

[Specifications] Material: Body: Chrome vanadium steel / Top of head: Aluminum Color: Main body black plating / Top of head colored anodized Thread diameter: M12 Thread pitch: P=1.5 Effective thread: 20mm Total length: 28mm with aluminum cap (25mm without aluminum cap) Pedestal outer diameter: φ20mm Seat information: 60° taper Body weight: Approximately 27g/piece with aluminum cap (approximately 25g/piece without aluminum cap) Accessories: Dedicated adapter (insert outer diameter 24mm, wrench size 19/21mm), hexagon wrench

[Notes] *When driving on public roads, please make sure that the wheel nuts are placed inside the fender. *Before installation, please check that there are no abnormalities on the hub bolts on the vehicle side or the bearing surface on the wheel side (no crushed screw threads, no adhesion of iron powder, foreign objects, etc.). *Tighten to the specified torque, and be sure to retighten to the specified torque after driving 100km. *Do not use an impact wrench.Damage due to over-torque and abnormal wear and metal fatigue due to impact effects may occur. *When using a cross wrench, never apply force with your foot. *When installing the wheel, if the wheel nut does not screw more than 10mm, do not install it. *For vehicles equipped with long hub bolts, be careful not to let the screw bottom out into the cap. *The orientation of the logo on the aluminum cap and the logo on the nut body are not the same.Thank you for your understanding. *Specifications of this product may change or production may be discontinued without prior notice.