Wind Speed Sensor, 3 Cups Ultrasonic Anemometer High Accuracy with 0.8m Extendable Cable, Wind Speed Detector for Greenhouses Weather Stations Ships

Sturdy Construction: Made from high strength ABS material, the cups of the wind speed sensor are designed to detect even the slightest breeze. This ensures and readings every time.

Interference Resistant: The wind transducer boasts a strong resistance to interference, ensuring accurate readings regardless of weather conditions. Compact and lightweight. Versatile Wiring Options: The wind speed sensor is adaptable to both bottom and side wiring, providing flexibility in installation and use, fitting seamlessly into a variety of setups. Item Type: Wind Speed Sensor Material: ABS Size: Approx. 158 x 180 x 70mm Celsius 6.2 x 7.1 x 2.8in Power Supply Voltage: 9-30V Signal Output: 0-5V Measurement Range: Wind speed 0-45mCelsiuss Extension Line Length: 0.8m Accuracy: +Celsius-(0.5+0.02V)mCelsiuss (V represents real time wind speed value) Resolution: 0.1mCelsiuss Starting Wind Speed: less than 0.8mCelsiuss Maximum Power Consumption: 0.48W Load Capacity: 12V power supply, current output impedance less than 350 Ohm Voltage and Impedance: 24V power supply, current output impedance: less than 900 Ohm , voltage output impedance more than 1K Ohm Operating Environment: Temperature -35 celsius to 60 celsius , humidity less than 100% without condensation

: IP64 Widely Used: Greenhouses, environmental , weather stations, ships, docks, aquaculture, advertising gate , meteorology, marine, environmental, airports, ports, laboratories, industrial and agricultural, and transportation environments for wind speed measurement. Weight: Approx. 272.00g Celsius 9.59oz Calculation : 0-5V: F=VCelsius5 A+B F: Represents the wind speed value, mCelsiuss; V: Sensor output voltage value, V; A: Sensor range width (upper range minus lower range); B: The minimum range value of the sensor (lower range limit); Wiring (wire is respectively): Red line:  power supply (output signal voltage) Black line: power supply negative (output signal voltage) Yellow line: signal (output signal voltage) Distribution diameter: Approx. 63mm Celsius 2.48in Installation diameter: Approx. 3.2mm Celsius 0.13in Aviation plug diameter: 15mmCelsius0.59in (it is recommended to reserve 25mm for wiring, wire first, and then install and fix the sensor) Troubleshooting: 1. The wind blades do not rotate properly and have a large lag. Due to  term use, there may be foreign objects or jamming inside the bearing. Please send the sensor back to the company for processing; 2. The display value of the analog signal instrument is incorrect. Possible wiring issues or serial port failures may result in the inability to obtain correct data. Please check if the wiring is correct and secure, if the serial port is occupied, and if the serial port settings are correct;