RC 3CH LED Lamp Light Controller Switch Panel Turn On/Off JR Plug for RC Car Vehicle Fixed Wing Aircraft Toy Power Supply

High-concerned chemical : none EU LVD Voltage : Low voltage: Below 50Vac or 75Vdc Material : Plastic Certification : NONE Warranty : As Description Model Number : Light Controller Switch Features : Lamp Light Controller Switch Item Type : SWITCHES Brand Name : Aideepen Is Smart Device : no Origin : Mainland China Certification : NONE Condition : New Type : Light Controller Switch Key Word : Controller Switch Dropship : Support

RC 3CH LED Lamp Light Controller Switch Panel Turn on/Off JR Plug for RC Car Vehicle Fixed Wing Aircraft Toy Power Supply Feature: 1. The third channel simple light control module can freely control the light by connecting the servo connector to the third channel (CH3) of the receiver. 2. Optional JR DuPont head and ZH1.5 plug for remote control car models and fixed-wing aircraft 3. The control panel can connect one or two sets of lights 4. Light control effects, opening, closing, breathing and flashing, 2-level switch, 3-level switch control, PWM signal control 5. Small size and light weight, it will not add extra burden to the remote control car

describe: RC LED light control is used with a remote control. There are 3CH function buttons on the remote control! Simple light control module, multiple light switching effects (on, off, breathing, flashing mode), just plug the servo plug of the light control module into the third channel of the receiver, you can remotely control the car light switch, switch working mode : Every time you press the third channel switch twice quickly, the modes cycle sequentially, simulating car lighting control lines, increasing the sense of reality, and very suitable for amateurs and enthusiasts.

parameter: Working voltage: 4.8V-6V JR DuPont head size: 120MM ZH1.5 size: 125MM Material: plastic + components Color as shown Compatible with RC cars Type: RC model parts and accessories

Switch working mode: Quickly flip the third channel switch twice or press the third channel button twice, and cycle through the changes in the following order: 2 outputs are closed -> A output opens, closes, breathes, closes -> B output opens, closes, breathes, closes -> 2 outputs both open, close, breathes, closes, flashes, closes... cycle. Mosquito car version: 1.5P connector, plug directly into the 1.5P socket of the motherboard Universal version: directly plug into the free third channel of the receiver, very simple and practical!

Package list: Switch module X1 label:yes