Cotton and polyester materials are recommended, but we cannot guarantee perfect adhesion. *Adhesion may not be possible depending on the type and condition of the fabric, so please always test beforehand. *Cannot be used on fabrics with special treatments such as water-repellent finishes or fabrics sensitive to heat. *Thickness and texture vary depending on the color and type, so the same cutting settings may not work. Always perform a test cut and check the pressing time and peeling timing beforehand.
This is our iron-on transfer sheet (iron-on cutting film) that allows you to easily create original T-shirts, hoodies, bags, event supplies, and more. Perfect for school festivals, clubs, festivals, food stalls, restaurants, Christmas, Merry Santa, Reindeer, New Year's, Halloween, graduations, and other events. We also recommend cutting company names and store names as promotional goods, including letters and logos.
Due to the production process, dust may adhere between the adhesive sheet and the peeling sheet due to static electricity, but this does not affect usability. ●Instruction manual included.*The recommended ironing temperature is approximately 150° to 160°, but this may vary slightly depending on the sheet. (Irons usually have settings such as low, medium, and high, but please check your iron's instruction manual or the manufacturer's instructions.)
【*Caution*】 ●This product is not meant to be printed on with a printer or similar device. ●We are not responsible for any damage or breakage to the applied object due to failures or mistakes during application or application, or for any damage that occurs when removing the product. Please understand this in advance. ●Please be aware that fading may occur due to ultraviolet rays contained in direct sunlight, and deterioration may be accelerated depending on the location and conditions of use.
●Fabrics with uneven surfaces or elasticity, such as knits, may be difficult to adhere to and may peel off. ●For longevity, hand wash gently with water or lukewarm water, avoiding hot water. ●Color unevenness or linear marks may appear due to the adhesion between the sheet and the film, but this is due to the specifications. ●Please handle and use the product at your own discretion and responsibility.●If you are unsure, please try a sample of approximately A4 size material to check compatibility.
[The size is not a perfect fit. Cut it slightly longer.] Cotton and polyester materials are recommended, but we cannot guarantee complete adhesion. *Depending on the type and condition of the fabric, adhesion may not be possible. Always test before use. *Cannot be used on fabrics with special treatments such as water-repellent finishes, or fabrics that are sensitive to heat. *Due to slight differences in thickness and texture depending on the color and type, the same cutting settings may not work. Always perform a test cut before use. Also, the pressing time and peeling timing may vary depending on the color and type. Always test before use. ■How to Use 1) Prepare the necessary tools. To cut the sheet, prepare scissors, an art knife, a cutting machine (if you have one), a cutting mat, etc., according to your needs. Also, prepare a silicone sheet to be used during heat transfer.*You can also use a silicone baking sheet. 2) Cut out the design. You will need to reverse the image when transferring, so create the cut data in reverse. The glossy side is the "release film side". Cut the back side (matte side). 3) Peel off any excess with a cutter or art knife and remove any excess material from the release film. 4) Prepare for transfer. Once you have removed the excess material, place the design sheet on the ironing board with the transparent release film facing up, along with the fabric you want to transfer the design onto, such as a T-shirt, and adjust the position. 5) Iron. The ironing sheet will melt easily if it is hot, so iron it on a medium setting (approximately 150℃) for 5 to 15 seconds, pressing firmly. If the adhesion is insufficient, iron again and adjust by extending the pressing time or slightly increasing the temperature. (For settings marked "low, medium, high", please check the instruction manual or manufacturer information.)6) Let it cool slightly before peeling off the release film. *If the film is stuck, do not pull it forcefully, but peel it off carefully while observing the situation. If part of it is lifting after peeling, place the silicone sheet again and lightly iron it to make it adhere. 7) Done! If it is firmly pressed down, it is done! *Due to the manufacturing process, dust may adhere between the surface to be applied and the surface to be peeled off due to static electricity, but this does not affect the use of the product.
Товар из Японии 
Возврат по недоставке
