PEI Sheet 150x150mm Double Sided Textured PEI Printing Bed Spring Steel Build Plate for TEVO Michelangelo 3D Printer

ENERGETIC PEI Sheet 150x150mm Double Sided Textured PEI Printing Bed Spring Steel Build Plate for TEVO Michelangelo 3D Printer

Advantage:

1.Special Design:Double Sided Textured + Smooth PEI Sheet/Double Side Textured PEI,One side textured, two kinds of surface to meet your different printing needs,And One Side Textured PEI plate,Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.

2.Good Quality:Magnetic, Flexible, Removable Steel Flex PEI Plate,It can stick to magnetics very well. High strength and heat resistance.

3.Easy to Install:PEI spring steel sheet is flat and flexible, could be magnetically attracted to the hotbed,(pls note you can choose with base or use your magnetic base )

4.Easy to Clean:PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.

Important Information:

1.Recommend print temps

PLA – 60C

HTPLA – 60C

PETG – 70-80C

PCTG – 70-80C

ABS – 100C

2.Product Usage Guidelines

PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface

Items Included:

Product1:Textured on one side-only one side textured pei surface,other side is blank.

Product2:Textured and Smooth-double side textured and smooth PEI ,double side can print.

Product3:Double Side Textured-double side textured PEI ,double side can print.

How to install?

ENERGETIC Double-Sided PEI Sheet Textured PEI side

Smooth PEI side (the smooth pei film is 0.2mm thick,and it is with 3m 468MP tape )

Strong magnetic Base (the thick is 1.2mm, 300LSE tape,  magnetism-600GS  high temp resist up to 130C at long time.)

Happy Printing!!!

Assembly Required: no Compatible Printer: TEVO Michelangelo 3d printer High-concerned chemical: none Control Method: Others Model Number: for TEVO Michelangelo Application: 3D printer heated bed Product: 150x150mm pei spring steel sheet Brand Name: FLEXBED Item Shape: Others