Charger included : N
Battery Included : no
High-concerned chemical : none
Model Number : Digital Volmeter Ammeter
Accessory Type : Charger Accessories
Brand Name : occkic
Origin : Mainland China
Certification : NONE
Display method : Digital Only
Power supply : DC
0.56" Inch Mini Digital Voltmeter Ammeter DC 100V 10A Volt Ampere Meter Amperemeter Voltage Tester LED Display Cable Connector 3 Types
【DC 100V 10A】
Specifications:
Working voltage of Meter itself:DC 4 - 30V(The maximum input voltage can not exceed 30V. Otherwise the meter will be burned)
Working current of Meter itself:=<20mA
Voltage Measuring range: DC 0 - 100V
Current Measuring range: DC 0 - 10A
Voltage resolution (V): 0.1V
Current resolution (A): 0.01A
Measure accuracy: 1% ( /- 1 digit)
Display: 0.28" digital tube, Two color blue and red
Refresh rate: about 300mS / times
Dimensions:48mm*29mm*26mm
Operation Temp: -10 Celsius- 65 Celsius
Package Include:
1x DC 100V 10A Voltmeter & Ammeter
[DC4.5V-30V Red Display]
This Red Color Display DC Voltage Meter with DC4.5/4.7/5V-30V range. It is easy to read, install and use
And it is self-powered version and supports Reverse polarity protection.
When the voltage is under 10V, there will 2 readings after decimal point, which mean the accuracy is 0.01 when it is under 10V; when it is above 10v, the accuracy is 0.1
No power supply needed
Specifications:
Display Color: Red\
Measure Voltage: DC 4.5/4.7/5V-30V two-wire access
Display: Three digit 0.56" LED, Red color
Refresh Speed: Approx.300mS/time
Highest input:DC 30V (higher than 30v has the risk of burn up)
Minimum input:DC 4.5/4.7/5VV(below than 4.5/4.7/5VV,measurement is inaccurate or does not show)
Minimum Resolution:0.01V(<10V)/0.1V(>10V)
Resolution:1%±1digit
Working Temperature:-20℃~65℃
Size:Approx. 48mm x 29mm x 22mm(L*W*H)
Hole Size: Approx.46*27mm
Current Consumption:<23mA
Package Included:
1 x 0.56" Digital Volmeter
【0-30V Red display】
Description:
Three Wires
Ultra-low cost, high precision to meet most of the application requirements.
High precision
low starting working voltage, red minimum 4.5V, green minimum 5.0V, blue minimum 5.0V.
with reverse protection, anti-burn.
Technical Parameters:
Measuring range 0.00V-30.0V
Power supply range red DC4.50-30.0V, green DC4.70-30.0V, blue DC5.00-30.0V
Maximum input DC30.0V. Note: Input voltage higher than 30V may be permanently damaged!
Tolerance ± 1%; error greater than or equal to 10V ± 0.3V; error less than 10V ± 0.10
Input impedance> 100K ohms
Working current red <23mA, green <18mA, blue <13mA
Refresh speed of about 300mS once
Display mode three 0.56 "LED digital tube
Display color red, green, blue optional
Lead length 20cm
Dimensions 48 x 29 x 22 mm, long X wide X thick;
Mounting hole 46 x 27 mm
Net weight 19g
Gross weight 26g
Operating temperature -10 ℃ ~ 65 ℃
Buyer Real Feedback
label:yes