BMS 4S 8S 16S 5.5A Balance Li-ion Lifepo4 LTO Lithium Battery Active Equalizer Balancer Board With Undervoltage Sleep Protection

High-concerned chemical : none Origin : Mainland China Brand Name : occkic

Features: 1. Using original -new ultra-low internal resistance MOS,2OZ copper thick PCB, equalization current 0-5.5A, it is an efficient energy transfer balancer. 2. High precision, obvious equalization effect, smaller battery equalization current, reserved sleep switch wiring position, sleep power-off mode working current less than 0.1mA, equalization voltage accuracy within 5mv. 3. Suitable for various batteries, suitable for ternary lithium, lithium iron phosphate, lithium titanate. 4. Prevent the bad damage of the battery, protect and prolong the life of the battery. 5. With under-voltage sleep protection, the voltage is lower than 3.0V, it will automatically stop entering the sleep state, and the standby power consumption is less than 0.1MA. Parameters: color: green, black specifications: 3S/4S V/8S/16S operating voltage: 1.8V-4.5V equalization current: 0-5.5A sleep power-off mode operating current: less than 0.1mA equalization voltage accuracy: less than 5mv quiescent current: about 12mA standby power consumption: 0.1mA less than recommended battery capacity: 60-300AH battery applicable switch: with manual sleep switch protection function: with under-voltage sleep protection (voltage below 3.0V will automatically stop entering sleep state) applicable to: ternary lithium, lithium iron phosphate, lithium titanate working principle: using original -new ultra-low internal resistance MOS,2OZ copper thick PCB, capacitor flying transfer charge porter, equalization board connected to the battery will start equalization work, the more balanced battery current is smaller. LED indicator light: LED light is on, indicating that it is in equilibrium work; LED light is off, indicating that it is in sleep; Wiring note: 1.The installation of 1 balanced board requires a certain technical electronic knowledge reserve. 2. When wiring, weld the terminal with wire to the battery pack before inserting the equalization board. 3. When inserting the belt terminal, please contact the B- end first, especially the bilateral outlet line. You need to insert the terminal line on the "B-" side first, and follow the small to large access. cable plugs with more than 4.13 strings need to be inserted diagonally, first contact the B- pin and insert diagonally upward, otherwise the board may be burned. 5. The assembly of this product requires welding operation, please strictly follow the wiring diagram! If you have any questions about the assembly process, please contact online customer . Product list suit 1: protection board x1 cable x1 suit 2: protection board x1 cable x1 acrylic shell x1 label:yes

Battery capacity: 43200 Charge indicator: No Number of ports: 1 port Voltage: 1.5