110V 220V Ceiling PIR Infrared Body Motion Sensor Detector Lamp Light Switch lampholder For LED lamp Bulb Automatic ON / OFF

High-concerned chemical : none Communication method : Other Brand Name : occkic Origin : Mainland China

Input voltage: AC110-240V universal Rated load:Small BK-P004M with resistive load (such as incandescent lamps) is 600W; inductive loads such as energy-saving lamps and LED lamps are 200W. Induction distance: 6-8 meters; Sensing angle: 120 degrees. Adjustable delay: 5 seconds to 10 minutes, Adjustable light sensitivity: The sensitivity can be adjusted from day to night (the LUX knob is adjusted to the sun sign to sense both day and night, and to the moon sign to sense only at night), the switch will automatically extend the power on when people move in the sensing area time. The timer starts when the person leaves. High-power relay control, available energy-saving lamps, LED lamps, incandescent lamps, exhaust fans, solenoid valves, monitoring equipment and other loads. Wiring method: The live wire and neutral wire of the AC110-240V power supply are connected to the L and N sockets of the inductive switch (if strictly differentiated, the L socket is connected to the live wire of the power supply, and the N socket is connected to the neutral wire, which can work normally without distinction), lights (or other electrical appliances) Connect the L' and N sockets of the sensor switch (note that the N socket is the neutral wire common socket, note that L' is the output live wire, and must be connected to lights or other electrical appliances) Wiring Instructions: The live wire of the power supply is connected to the brown wire of the sensor, and the neutral wire is connected to the blue wire; One wire of the light is connected to the red wire of the sensor, and the other wire is connected to the blue wire of the sensor. That is, the red wire of the sensor is the live wire input, and the brown wire is the live wire output. Blue is the common neutral line. If you can't distinguish between the live wire and the neutral wire, if you want to control a light, connect the 2 wires of the power supply to the red and blue wires of the sensor respectively, and connect the 2 wires of the light to the brown and blue wires of the sensor respectively. label:yes