Quantity : 1
High-concerned chemical : none
Package : SOP
is_d : Yes
Supply Voltage : DC 12V 24V
Type : Module
Operating Temperature : 0-70C
Origin : Mainland China
Condition : New
Feature 1 : Fan Speed Controller
Feature 2 : 4 Pin PWM Fan Controller
Feature 3 : Temperature Controlled Fan Regulator
Feature 4 : DC12V 24V Fan Speed Governor
Feature 5 : 3 Channel PWM Fan
Feature 6 : Thermostatic Fan Controller
Feature 7 : DIP Switch Temperature Control
Feature 8 : Computer Case Fan Speed Controller
Feature 9 : Chassis Cooling Fan Regulator
Feature 10 : 4 Wire Fan Temperature Governor
Product Features
1. Supports dual voltage input of DC 12V and 24V, with strong compatibility and peace of mind
2. Three independent four wire outputs, capable of synchronously and intelligently regulating three fans
3. Built in high-precision temperature control module, real-time temperature sensing and automatic speed regulation
4. Simple design, easy wiring, convenient for users to quickly get started and operate
5. The dip switch sets the temperature control threshold, which is intuitive to operate and does not require debugging
Product Introduction
This speed controller supports 12V/24V 5A input (current determined by interface current carrying capacity), with one input and three synchronous outputs. It is only compatible with Intel standard 4-wire fans (2/3 wires are not available). Adopting pure PWM signal speed regulation to avoid lagging and abnormal noise caused by power interruption. When the blue wire is connected to the negative pole, it is the minimum speed (about 20%, not turned off)
Product Parameters
Working voltage: DC 12V 24V
Adjustment method: temperature control and speed regulation
Maximum output current: 5A
Instructions for Use
The governor is designed to enter the minimum speed at a fixed temperature of around 23 ℃, and the maximum temperature speed is set between 43-70 ℃ through a dip switch;
The maximum speed and temperature of the DIP all closed state is 43 ℃, and the fan is continuously variable between 23-43 ℃;
Connect the first switch to the 0N position, and the maximum speed temperature is 52 ℃. The fan is continuously variable between 23-52 ℃;
Close the first circuit and connect the second circuit. The maximum speed temperature is 61 ℃, and the fan is continuously variable between 23-61 ℃;
Both channels are connected, and the maximum speed temperature is 70 ℃. The fan is continuously variable between 23-70 ℃;
The default switch for shipment is fully turned off
Packing List
Fan speed regulator * 1
Temperature probe * 1
label:yes
Возврат по недоставке
