Battery Box for 5V 9V 12V Output 6x 18650 Battery UPS Uninterrupted DIY Power Bank Box for House Router Without Battery

Quantity : 1 High-concerned chemical : none Package : TQFP is_d : Yes Supply Voltage : As Description Type : Module Brand Name : DIY NOW Operating Temperature : As Description Origin : Mainland China Condition : New Condition : New Type : Battery Box Key Word : Battery Box Holder Dropship : Support

Battery Box for 5V 9V 12V Output 6x 18650 Battery UPS Uninterrupted DIY Power Bank Box for House Router Without Battery Features: 1. Solderless design, allowing users to easily disassemble and replace batteries. 2. Features DC constant voltage UPS function, enabling automatic charge and discharge management without manual intervention. 3. Multiple output functions, covering three common voltages: 5V, 9V, and 12V, suitable for devices such as fiber optic modems, routers, and security cameras. 4. Undergoes strict quality control to ensure long-term stable operation and extended life. 5. Stable product performance with a peak output power of up to 60W.

Product Parameters: Battery Capacity: 6 * 3.7V * 3400mAh = 74 watt-hours (batteries not included) Rated Output Power: 12V 5A = 60W; Actual output power depends on the battery's output power. Output Voltage: Independent output 12V 3-5A; 9V 1A; USB 5V 2-3A; Input power conditions must be met when using the UPS function. The product is not voltage regulated; batteries are connected in series for direct output, and the voltage varies with the battery level. Suitable for high-power appliances that do not require voltage regulation, such as motors, LED lights, audio equipment, solenoid valves, printers, etc. Applicable Batteries: 3.7V cylindrical flat-top 18650 batteries (power batteries recommended) Charger Type: Internal charging current limiting circuit; can be charged with a 12-13V adapter. When used as a UPS, higher input power results in greater stability. Charging Power: Input adapter power must be >= total load power + battery charging power 6W Overcharge Protection: 4.25V * 3 Low Voltage Protection: 2.75V * 3 Overcurrent Detection Voltage: 0.1V ± 0.025V Temperature Range: -20~60℃ DC Interface Standard: DC 5.5*2.1mm (inner positive, outer negative)

Precautions: 1. The spring is for the negative terminal, and the copper piece is for the positive terminal. Do not install incorrectly, or it will burn out! 2. Use high-quality batteries and ensure strict matching; each single battery in the battery pack should have parameters that are as consistent as possible. 3. This product can only use flat-top 18650 batteries; pointed-top batteries are more than 2mm longer and cannot be used.

Package List: Solderless Battery Box * 1 0.3m Cable * 1 label:yes