ESP32 DevKitC WIFI+Bluetooth Development Board Based ESP32 Equipped With ESP32 32D 32U ESP32 Module LOT NodeMCU-32 Type C

Quantity : 1 High-concerned chemical : none is_d : Yes Dissipation Power : TYPE-C Supply Voltage : TYPE-C Type : Module Brand Name : diymore Origin : Mainland China Condition : New

Features: 1. The ESP32 DevKitC development board adopts the mainstream TYPE-C interface, and the motherboard can be equipped with ESP32 modules: ESP-32, ESP-32D, ESP-32U, ESP32 WROVER. 2. ESP32 DevKitC is an entry-level ESP32 development board with integrated ESP32 pins that are easy to connect and use, and can be easily plugged into the breadboard. 3. ESP32 DevKitC is a small development board based on the ESP32 module, supporting Wi Fi and Bluetooth functions, with rich peripherals, allowing users to easily develop products. 4. The onboard LDO is led out and can power external components. ESP32 DevKitC groups different peripheral interfaces to help users easily get started with product development. 5. ESP32 DevKitC has excellent RF performance, and users do not need to consider RF and antenna design when designing and developing applications. The basic system requirements are already included on the board, and users only need to connect a USB cable to proceed with development. Parameter: ESP32 DevKitC Development Board: Module based on ESP32 EN: Reset button. Boot: Download button. Press and hold the Boot key, while pressing the EN key once (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port. USB-to-UART bridge: A single chip USB-UART bridge that can provide a transmission rate of up to 3 Mbps. Interface: TYPE-C interface, which can be used as a power supply for circuit boards or as a communication interface between PC and ESP32-WROOM-32 modules. Communication: 2.4 GHz Wi Fi+Bluetooth Processor: High performance Xtensa@32 Bit LX6 dual core processor, ultra low power co processor Multiple peripherals: with the best power consumption performance, RF performance, stability, versatility, and reliability, suitable for various application scenarios and different power consumption requirements. The development board can choose from any of the following three power supply methods: TYPE-C interface power supply (default) 5V/GND pin power supply 3V3/GND pin power supply Size: 54.4 * 27.9mm ESP-32D: Chip: ESP32-D0WD SPI: Flash 32 Mbit, 3.3 V Crystal oscillator: 40 MHz Antenna: onboard PCB antenna Wi Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps) Aggregation of A-MPDU and A-MSDU, supporting 0.4 µ s protection interval Working channel center frequency range: 2412~2484 MHz Bluetooth protocol: compliant with BT v4.2 BR/EDR and BT LE standards RF: NZIF receiver with sensitivity of -97 dBm; Class-1, Class-2, and Class-3 emitters; AFH Integrated crystal oscillator: 40 MHz crystal oscillator Integrated SPI flash 1: 4 MB Working voltage/supply voltage: 3.0 V~3.6 V Average working current: 80 mA Minimum power supply current: 500 mA Suggested working environment temperature range: -40 ℃~+85 ℃ ESP-32U: Chip: ESP32-D0WD SPI: Flash 32 Mbit, 3.3 V Crystal oscillator: 40 MHz Antenna: External antenna connector, which needs to be used together with an external antenna Wi Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps) Aggregation of A-MPDU and A-MSDU, supporting 0.4 µ s protection interval Working channel center frequency range: 2412~2484 MHz Bluetooth protocol: compliant with BT v4.2 BR/EDR and BT LE standards RF: NZIF receiver with sensitivity of -97 dBm; Class-1, Class-2, and Class-3 emitters; AFH Integrated crystal oscillator: 40 MHz crystal oscillator Integrated SPI flash 1: 4 MB Working voltage/supply voltage: 3.0 V~3.6 V Average working current: 80 mA Minimum power supply current: 500 mA Suggested working environment temperature range: -40 ℃~+85 ℃ ESP32WROVER: Power supply voltage: 2.3V~3.6V Frequency: 2.4GHz~2.5GHz Installation type: SMT Data rate: 150Mbps Protocol: 802.11b/g/n Storage capacity: 4MB Wi Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps) Aggregation of A-MPDU and A-MSDU, supporting 0.4 µ s protection interval Working channel center frequency range: 2412~2484 MHz Bluetooth protocol: Complies with Bluetooth V4.2 BR/EDR and low-power Bluetooth standards RF: NZIF receiver with sensitivity of -97 dBm Class-1, Class-2, and Class-3 emitters; AFH Module interface: SD card, UART, SPI, SDIO, I2C, LED PWM, motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, TWAI ® (Compatible with ISO 11898-1 protocol, i.e. CAN specification 2.0) On chip sensor: Hall sensor Integrated crystal oscillator: 40 MHz crystal oscillator Integrated SPI flash: 4 MB Integrated PSRAM: 8 MB Working voltage/supply voltage: 2.3 V~3.6 V Working current: average: 80 mA Minimum supply current: 500 mA Suggested working environment temperature -40 ℃to 85 ℃ Package include: 1X development board

label:yes